TDS

LevelQuik®RS(RapidSetting)SelfLevelingUnderlayment/TDS108
1 Product Name
LevelQuik®RS(RapidSetting)SelfLevelingUnderlayment
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
Helps level floors prior to the installation of ceramic tile, natural stone,
resilient flooring, carpet, wood and other floor coverings. This quick-
setting underlayment can be applied to 1.5" (3.8 cm) thick in one pour
and seeks its own level in minutes. With proper installation, the use of
LevelQuik®RScanachieveanextraheavyratingforhighimpactuse
in food plants, dairies, breweries and kitchens. LevelQuik RS may be
applied to in residential structures with floor joists up to 24" o.c.
Formulated using ControlledCureTechnology®, LevelQuik RS helps
eliminate installation problems such as bond failure, crumbling and
staining of resilient flooring caused by the free moisture found in
traditional underlayments.
Key Features
Seeks its own level in minutes
Levels from feather edge to 1.5" in one pour
Walkable in 4 hours
Exceeds TCNA requirements for ceramic tile installations
Uses
Suitable as an Underlayment for:
Vitreous, semi-vitreous or non-vitreous tile
Ceramic, mosaic or quarry tile
Impervious porcelain and glass tile
Cement-based precast terrazzo
Natural stone tile
Carpet
Wood, parquet
Vinyl composition tile (VCT)
Sheet vinyl flooring
Laminated flooring
Suitable Substrates
Absorbent concrete
Non-absorbent concrete
Lightweight concrete
Gypsum-based underlayments
Existing ceramic tile
Cement terrazzo
Exterior grade plywood
OSB
Cutback adhesive residue
Prepared VCT
Composition of Product
LevelQuik©isaproprietarydryblendofcopolymers,cements,and
inorganic chemicals.
Benefits of Product in the Installation
Can be applied from feather edge to 1.5" (3.8 cm) thick in a single
pour
Reduces bond failure and crumbling of resilient flooring
Cures fast and develops high early strength for quick installation
Rated for Extra Heavy use per ASTM C627
Rated for Residential use over wood subfloors with joists to 24" (61
cm) per ASTM C627
Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass or
plastic. Contact CUSTOM technical services for recommendations.
Donotusewhenthetemperatureisbelow50°F(10°C)orabove90°F
(32°C).
Do not use as a permanent wear surface.
Do not use on sloped surfaces that require drainage.
Precautions should be taken when applying over post-tensioned
concrete, pre-stressed concrete or prefabricated concrete planks.
Contact CUSTOM technical services for further details.
For installations over metal decks, contact CUSTOM technical services
for recommendations.
This product is suitable for use in exterior conditions as an
underlayment in areas that are not prone to water immersion or
prolongedexposuretotemperaturesabove120°F(50°C).
Packaging
50 lb (22.68 kg) bags
4 Technical Data
Applicable Standards
ASTM International (ASTM)
LevelQuik®RS(RapidSetting)SelfLevelingUnderlayment
Published Date: 3/28/2018