Specification

TILING 09 30 00 Setting / TDS-124
1 Product Name
Marble, Granite & Travertine Premium Medium Bed Mortar
2 Manufacturer
Custom Building Products
13001 Seal Beach Blvd.
Seal Beach, CA 90740-2757
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
A premium quality, polymer-modified mortar for small to large format
natural stone, ceramic or porcelain tile 15" x 15" (38 x 38 cm) or
larger, clay pavers or other thin or medium bed applications. With a
non-slumping formula that eliminates lippage and minimizes leveling
requirement, this mortar can be applied for horizontal applications as
thick as 3/4" (19 mm) or for thin bed applications to 1/4" (6 mm).
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic, quarry, cement
body tile, pavers
Impervious porcelain
Brick and stone veneer
Cement-based precast terrazzo
Gauged or Ungauged Natural stone tile
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard®Lite, cement backerboards
Liquid applied waterproofing membranes such as RedGard® and
Custom®9240
CrackpreventionsheetmembranessuchasCrackBuster®Pro
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Gypsum wallboard (interior dry areas)
Existing ceramic tile (scarified)
Fully-bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive (see preparation instructions)
Composition of Product
Modified dry mortar, which is a proprietary blend of Portland cement,
inorganic aggregates, copolymers and chemicals.
Benefits of Product in the Installation
Formulated for large format natural stone and large tile applications
Reduces installation time and labor by eliminating lippage and
minimizing the need for additional leveling
Sag and slip resistance immediately holds wall tiles in place
Can be used in thin-set or medium bed applications up to 3/4" (19
mm)
Exceeds ANSI A118.4 and A118.11 standards without the need for
additives
Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass,
plastic or OSB panels.
When setting moisture sensitive natural stone, cement or agglomerate
tileuseEBMLite™EpoxyBondingMortar100%SolidsorCEGLite™
100% Solids Commercial Epoxy Grout.
DonotusetoinstallresinbackedstoneuseEBMLite™EpoxyBonding
Mortar100%Solids,CEGLite™100%SolidsCommercialEpoxyGrout
orcontactCustom's®TechnicalServicesforrecommendations.
When setting glass tile larger than 6" x 6" (15 x 15 cm), contact
Custom's®TechnicalServicesforrecommendations.
When setting dimensional stone larger than 12" x 12" (30 x 30 cm),
contactCustom's®TechnicalServicesforrecommendationsregarding
subfloor deflection requirements.
Packaging
50 lb (22.68 kg) bag
White
4 Technical Data
Applicable Standards
American National Standards Institute (ANSI) ANSI A108.5, A118.4 and
A118.11 of the American National Standards for the Installation of
Ceramic Tile
ASTM International (ASTM)
ASTM C109 Standard Test Method for Compressive Strength of
Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C627 Standard Test Method for Evaluating Ceramic Floor Tile
Installation Systems Using the Robinson-Type Floor Tester
Resilient Floor Covering Institute (RFCI) Recommended Work Practices
for Removal of Resilient Floor Coverings
Tile Council of North America (TCNA) TCNA Handbook for Ceramic Tile
Installation, TCNA Method EJ171
Marble, Granite & Travertine Premium Medium Bed Mortar
Published Date: 1/17/2014