Specification

ManualsBrandsCustom Building Products ManualsFlooringMultiSet White 50 lb. Modified Thin-Set Mortar

Setting / TDS-192
1 Product Name
MultiSet Modified Thin-Set Mortar
2 Manufacturer
Custom Building Products
13001 Seal Beach Blvd.
Seal Beach, CA 90740-2757
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: 800- 200-7765
Email: contactus@cbpmail.net
custombuildingproducts.com
3 Product Description
Good bond strength for tile installations over most surfaces. Apply over
concrete, cement backerboards and existing ceramic tile. Meets ANSI
A118.4 without the need for additives. Meets ANSI A118.11 when
Thin-Set Admix Concentrate is added at the required 5:1 mix ratio.
Key Features
Economical modified mortar for floor and wall tile installations
Suitable Tile Types
Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry,
cement and porcelain
Brick and mini brick
Cement-based precast terrazzo
Natural stone
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard® Lite cement backerboard
Liquid applied waterproofing membranes such
as RedGard® and Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Uncoupling membranes such as SpiderWeb II
Surfaces treated with MBP Multi-Surface Bonding Primer
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Gypsum wallboard (interior dry areas)
Existing ceramic tile (scarified)
Fully-bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive (see preparation instructions)
Benefits of Product in the Installation
Add to 100% Solids Epoxy Grout on vertical installations of ceramic
tile and stone.
Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic,
quarry, cement
Impervious porcelain and glass tile
Brick and mini brick
Cement-based precast terrazzo
Natural stone tile including moisture sensitive green and black
marble and granite
Resin-backed stone
Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass,
plastic or OSB panels.
Not recommended for interior and exterior pools and water features.
CUSTOM recommends MegaLite®CrackPreventionMortar,
MegaFlex®CrackPreventionMortar and ProLite®LargeTileand
Stone Mortar for the installation of ceramic and porcelain tile in
submerged applications. For additional information, contact Custom
Technical Services.
When setting moisture sensitive natural stone, cement or agglomerate
tile use EBMLite™100%SolidsEpoxyBondingMortar, CEG-IG 100%
Solids Industrial Grade Epoxy Grout or CEGLite™100%Solids
Commercial Epoxy Grout.
Do not use to install resin-backed stone; use EBMLite™100%Solids
Epoxy Bonding Mortar, CEG-IG 100% Solids Industrial Grade
Epoxy Grout, CEGLite™100%SolidsCommercialEpoxyGrout or
contactCustom's®TechnicalServicesforrecommendations.
For clear or translucent glass, CUSTOM recommends Glass Tile
Premium Thin-Set Mortar. When setting glass tile larger than 6" x 6"
(15x15cm),contactCustom's®TechnicalServicesfor
recommendations.
When setting dimensional stone larger than 12" x 12" (30 x 30 cm),
contactCustom's®TechnicalServicesforrecommendationsregarding
subfloor deflection requirements.
Packaging
50 lb (22.68 kg) bags
Gray or white
4 Technical Data
Applicable Standards
AmericanNationalStandardsInstitute(ANSI)—ANSIA108.5,A118.4
and A118.11 of the American National Standards for the Installation of
Ceramic Tile ASTM International (ASTM)
MultiSet Modified Thin-Set Mortar
Published Date: 8/11/2014

Summary of content (5 pages)

PAGE 1
Setting / TDS-192 MultiSet Modified Thin-Set Mortar 1 Product Name MultiSet Modified Thin-Set Mortar 2 Manufacturer Custom Building Products 13001 Seal Beach Blvd. Seal Beach, CA 90740-2757 Customer Support: 800-272-8786 Technical Services: 800-282-8786 Fax: 800- 200-7765 Email: contactus@cbpmail.net custombuildingproducts.com 3 Limitations to the Product Product Description Good bond strength for tile installations over most surfaces.
PAGE 2
Setting / TDS-192 MultiSet Modified Thin-Set Mortar ASTM C109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in or [50-mm] Cube Specimens) 5 Instructions General Surface Prep ASTM C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester Resilient Floor Covering Institute - (RFCI) Recommended Work Practices for Removal of Resilient Floor Coverings Tile Council of North America (TCNA) - TCNA Handbook for Ceram
PAGE 3
Setting / TDS-192 MultiSet Modified Thin-Set Mortar Bonding to Plywood Surfaces Application of Product Plywood floors, including those under resilient flooring, must be structurally sound and must meet all ANSI A108.01 Part 3.4 requirements. Maximum allowable deflection: L/360 tile L/720 stone. See TCNA F150-13 Tile Installations, TCNA F141-13 and F250-13 for Stone. For questions about proper subfloor installation requirements, call Custom technical services. INSTALLATION TO CONFORM TO ANSI A108.5.
PAGE 4
Setting / TDS-192 MultiSet Modified Thin-Set Mortar 7 Product Warranty Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Custom's® sole liability under this warranty shall be limited to the replacement of the product.
PAGE 5
Setting / TDS-192 MultiSet Modified Thin-Set Mortar Coverage SQUARE FOOT COVERAGE PER 50 LB BAG (SQUARE METER PER 22.68 KG) Trowel Size Min Coverage Max Coverage 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) Square-Notch 85 sq. ft. (7.9 M²) 90 sq. ft. (8.4 M²) 1/4" x 3/8" x 1/4" (6 x 9.5 x 6 mm) Square-Notch 60 sq. ft. (5.6 M²) 67 sq. ft. (6.2 M²) 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) Square-Notch 42 sq. ft. (3.9 M²) 47 sq. ft. (4.