MSDS

MATERIAL SAFETY DATA SHEET
VersaBond Fortified Thin-Set Mortar
Lower Flammability Limit: Not available.
Upper Flammability Limit: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Specific Gravity: Not available.
Solubility in Water: Not available.
Coefficient of Water/Oil Distribution: Not available.
Auto-ignition Temperature: Not available.
Percent Volatile, wt. %: Not available.
VOC content: 0%, Not applicable; 0 wt, Not applicable.
Section 10: STABILITY AND REACTIVITY
Stability: Stable under normal storage conditions. Keep dry in storage.
Conditions of Reactivity: Heat. Incompatible materials. Moisture.
Incompatible Materials: None known.
Hazardous Decomposition Products: May include, and are not limited to: oxides of carbon.
Possibility of Hazardous Reactions: No dangerous reaction known under conditions of normal use.
Section 11: TOXICOLOGY INFORMATION
EFFECTS OF ACUTE EXPOSURE
Component Analysis
Ingredient
Silica, crystalline, quartz
LD
50
(oral)
500 mg/kg, rat
LC
50
Not available.
Portland cement
Not available.
Not available.
Cement, alumina, chemicals
Not available.
Not available.
Ethylenevinylacetate copolymer
Not available.
Not available.
Calcium formate
2650 mg/kg, rat
Not available.
Eye: Irritating to eyes. May cause burns in the presence of moisture. Symptoms may
include discomfort or pain, excess blinking and tear production, with possible
redness and swelling.
Skin: May cause skin irritation. May cause burns in the presence of moisture. Skin
contact during hydration may slowly develop sufficient heat that may cause
severe burns possibly resulting in permanent injury. Do not allow product to
harden around any body part or allow continuous, prolonged contact with skin.
Handling can cause dry skin.
Ingestion: May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Inhalation: May cause respiratory tract irritation.
EFFECTS OF CHRONIC EXPOSURE
Target Organs: Lungs.
Chronic Effects: Hazardous by WHMIS/OSHA criteria.
Carcinogenicity: Hazardous by WHMIS/OSHA criteria.
4 / 7