TDS
VersaBond®ProfessionalThinSetMortar/TDS119
1 Product Name
VersaBond®ProfessionalThinSetMortar
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: 800- 200-7765
Email: contactus@cbpmail.net
custombuildingproducts.com
3 Product Description
A professional formula, all-purpose mortar, polymer-modified to
providegoodbondstrengthforfloorandtileprojects.VersaBond®
cures quickly even in cold climates and adheres to most surfaces,
exceeding ANSI A118.4 and A118.11 without the need for additives.
Key Features
For most standard installations
Fast setting even in cold weather
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry,
cement body tile
Impervious porcelain and glass tile
Brick and thin brick
Cement-based precast terrazzo
Natural stone tile
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard® Lite cement backerboard
Liquid applied waterproofing membranes such
as RedGard® and Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Uncoupling membranes such as RedGard®UncouplingMat
Surfaces treated with MBP Multi-Surface Bonding Primer
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Gypsum wallboard (interior dry areas)
Existing ceramic tile (scarified)
Fully-bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive (see preparation instructions)
Composition of Product
VersaBond®FortifiedThinSetMortarisadry,proprietaryblendof
Portland cement, copolymers, inorganic aggregates and chemicals
Benefits of Product in the Installation
Cost-efficient, all-purpose mortar
Good bond strength
Cures quickly even in cold climates
Approved for industry-recommended interior and exterior applications
Exceeds ANSI A118.4 and A118.11 standards without the need for
additives
Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass,
plastic or OSB panels.
Not recommended for interior and exterior pools and water features.
CUSTOM recommends MegaLite®CrackPreventionMortar,
MegaFlex®CrackPreventionMortar and ProLite®LargeTileand
Stone Mortar for the installation of ceramic and porcelain tile in
submerged applications. For additional information, contact Custom
Technical Services.
When setting moisture sensitive natural stone, cement or agglomerate
tile use EBMLite™EpoxyBondingMortar100%Solids or CEGLite™
100% Solids Commercial Epoxy Grout.
Do not use to install resin-backed stone; use EBMLite™EpoxyBonding
Mortar 100% Solids, CEGLite™100%SolidsCommercialEpoxyGrout
orcontactCustom's®TechnicalServicesforrecommendations.
For clear or translucent glass, CUSTOM recommends Glass Tile
Premium Thin-Set Mortar. When setting glass tile larger than 6" x 6"
(15x15cm),contactCustom's®TechnicalServicesfor
recommendations.
When setting dimensional stone larger than 12" x 12" (30 x 30 cm),
contactCustom's®TechnicalServicesforrecommendationsregarding
subfloor deflection requirements.
Packaging
50 lb (22.68 kg) and 25 lb (11.34 kg) bags
Gray or white
VersaBond®ProfessionalThinSetMortar
Published Date: 3/28/2017