SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
i. Sensitivity to Mechanical Impact:
Not Available
ii. Sensitivity to Static Discharge:
Not Available
5.4 SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS
Keep upwind of fire. Wear full fire fighting turn-out gear(full bunker gear) and respiratory protection
(SCBA).
Section 6: ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.2 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Methods for Containment:
Prevent further leakage or spillage if safe to do so. Do not flush to
sewer or allow to enter waterways. Use appropriate Personal
Protective Equipment (PPE).
Methods for Cleaning-Up:
Pick up and transfer to properly labeled containers. Dispose of
unwanted material properly in accordance with all local, regional,
national and international regulations.
Section 7: HANDLING AND STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING
Handling:
Use in well-ventilated areas. Wear impervious gloves and eye
protection. Do not mix with other chemical products, except as
indicated by the manufacturers. Do not get in eyes. Do not get on
skin or clothing. Do not breathe dust/fume/vapor. Do not take
internally.
General Hygiene Advice:
Use good industrial hygiene practices and wear recommended
personal protection. Launder contaminated clothing before reuse.
Wash hands before eating, drinking, or smoking.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Storage:
Keep out of the reach of children. Keep container tightly closed.
Store at room temperature and keep containers closed when not in
use.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETER
Exposure Guidelines
Page 4 of 11
OmniGrip® Premium Lightweight Tile Adhesive