SDS

MATERIAL SAFETY DATA SHEET
OmniGrip Maximum Strength Adhesive
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient OSHA-PEL ACGIH-TLV
15 mg/m³ (total);
Calcium carbonate 5 mg/m³ (resp) 10 mg/m³
Distillates (petroleum), hydrotreated light 100 ppm 200 mg/m³
Ethylene glycol Not available. 50 ppm
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Paste-like compound.
Color: White
Odor: Not available.
Odor Threshold: Not available.
Physical State: Paste.
pH: 8.5 – 9.5
Viscosity: 650K – 800K cps
Freezing Point: ~ 0 ºC (~ 32 ºF).
Boiling Point: Not available.
Flash Point: Not available.
Evaporation Rate: Not available.
Lower Flammability Limit: Not available.
Upper Flammability Limit: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Relative Density: ~ 1.1 g/mL.
Solubility in Water: Partially Miscible
Coefficient of Water/Oil Distribution: Not available.
Auto-ignition Temperature: Not available.
Decomposition Temperature: Not available.
Percent Volatile, wt. %: ~
30%.
3 / 6