Specification

Setting / TDS-126
Application of Product
INSTALLATION TO CONFORM TO ANSI A108.4. Use a properly-sized
notch trowel to ensure proper coverage under tiles. Using flat side of
trowel, apply skim coat of adhesive with appropriate size trowel. Apply
additionaladhesivewithnotchsideoftrowelheldata45°angletothe
surface, combing in one direction. Press tile firmly into place in a
perpendicular motion across ridges, moving back and forth.
Perpendicular pressing flattens ridges and closes valleys allowing
maximum coverage. With some tile, back-buttering is advisable. Adjust
tile promptly and beat in with a beating block and rubber mallet.
Periodically pull up a tile and check the back to ensure complete
coverage with the adhesive. Do not apply more adhesive than can be
covered with tile in 30 minutes. If adhesive starts to skin over (not
sticky), retrowel before setting tile. Do not apply more adhesive than is
necessary to achieve a sufficient bond.
Curing of Product
Standardminimumdrytimefor8”x8”tileis2472hoursbefore
applying grout. Dry time will be extended if using larger tiles, bonding
to non-porous surface, in high humidity, or if temperature is below 60F
(15C). Do NOT apply excess adhesive.
Cleaning of equipment
Remove fresh adhesive from tile surfaces with a damp cloth. Clean
tools in warm soapy water.
Storage
Store in a cool, dry area.
Health Precautions
This product contains petroleum distillates. Avoid eye contact or
prolonged contact with skin. If ingested, do not induce vomiting; call a
physician immediately. Use with adequate ventilation.
Conformance to Building Codes
Installation must comply with the requirements of all applicable local,
state and federal code jurisdictions.
6 Availability & Cost
Location Item Code Size Color Package
USA OGA1-2 1 gal (3.78 L) White Pail
USA OGA3 3 1/2 gal (13.25 L) White Pail
Canada COGAQT 1 qt (.946 L) White Pail
Canada COGA1-2 1 gal (3.78 L) White Pail
Canada COGA3 3 1/2 gal (13.25 L) White Pail
7 Product Warranty
Custom®BuildingProductswarrantstotheoriginalconsumer
purchaser that its product shall be free from defects in material and
workmanship under normal and proper usage for a period of one year
followingthedateoforiginalpurchase.Custom's®soleliabilityunder
this warranty shall be limited to the replacement of the product. Some
states, countries or territories do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty will not extend to any
product which has been modified in any way or which has not been
usedinaccordancewithCustom's®printedinstructions.Custom®
makes no other warranties either expressed or implied. This warranty
gives you specific legal rights, and you may have other rights that vary
from state to state or from one country/territory to another. This
warranty is not transferrable.
WhenOmniGrip®MaximumStrengthAdhesiveisusedasapartofa
qualifying full installation system of CUSTOM products, the installation
can qualify for up to a 15 year system warranty. CUSTOM will repair
and/or replace, at its discretion, the affected area of the system. For
more information, find details and limitations to this warranty at
custombuildingproducts.com.
8 Product Maintenance
Properly installed product requires no special maintenance.
9 Technical Services Information
For technical assistance, contact Custom technical services at 800-282-
8786 or visit custombuildingproducts.com.
10 Filing System
Additional product information is available from the manufacturer upon
request.
Expected Wear
Properly installed tile will last for more than 60 years.
Related Products
Polyblend®SandedGrout
FusionPro®SingleComponent®Grout
CEGLite™100%SolidsCommercialEpoxyGrout
Prism®SureColor®Grout
CEG-IG 100% Solids Industrial Grade Epoxy Grout
OmniGrip®MaximumStrengthAdhesive
Published Date: 9/22/2014