SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS
SAFETY DATA SHEET
Page 8 of 15
Prism® SureColor® Stain Resistant Grout Print Date: 22-May-14
exceeded. Respirators should be selected by and used under the direction of a trained
health and safety professional following requirements found in OSHA’s respirator standard
(29 CFR 1910.134) and ANSI’s standard for respiratory protection (Z88.2).
iv. General Health and Safety Measures: Handle according to established industrial hygiene
and safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.):
Solid Powder (Various Colors)
Odor:
Not available
Odor Threshold:
Not available
pH:
~11 – 11.5
Melting point/Freezing point:
Not available
Initial boiling point and boiling range:
Not available
Flash point:
> 212°F
Evaporation rate (Water=1):
Not available
Flammability:
Not flammable
Upper Flammability/Explosive Limit:
Not available
Lower Flammability/Explosive Limit:
Not available
Vapor Pressure
Not available
Vapor Density:
Not available
Relative Density:
1.56 – 1.62 (Wet Density)
Solubility in Water:
Slightly Soluble
Partition coefficient: n-octanol/water:
Not available
Auto-ignition temperature:
Not available
Decomposition Temperature:
Not available
Viscosity (cps):
Not available
VOC Content:
0 g/L (0%)
Section 10: STABILITY AND REACTIVITY
10.1. REACTIVITY
No dangerous reaction known under conditions of normal use.
10.2. CHEMICAL STABILITY
Stable under normal storage conditions. Keep dry in storage.
10.3. POSSIBILITY OF HAZARDOUS REACTION
Reacts with water to form alkaline solution (condition of normal use)
10.4. CONDITIONS TO AVOID
Heat. Incompatible materials.
10.5. INCOMPATIBLE MATERIALS
Acids, Aluminum, Ammonium salts, Alkali and alkaline earth metals.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS
Upon decomposition, this product may yield oxides of carbon, cobalt, and iron