TDS

Prism®ColorConsistentGrout/TDS128
1 Product Name
Prism®ColorConsistentGrout
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
A fast-setting, lightweight, polymer-modified, cement-based grout that
offers consistent color without mottling or shading, regardless of tile
type, temperature or humidity. Cures quickly and develops high early-
strength for dense grout, joints from 1/16" (1.6 mm) to 1/2" (13 mm).
Prism®maybeusedforinteriororexteriorinstallations,including
floors, countertops, walls, ceilings, showers, fountains and pools.
Key Features
ExclusiveSureColor®technologydeliversconsistentcolor
Won't mottle or shade regardless of tile type, temperature or humidity
No efflorescence
Fast setting, walkable in four hours
17 lbs. (7.71 kg) box covers the same area as a typical 25 lb. bag of
conventional grout
Produces stain resistant, dense grout joints
Uses
Use to fill joint widths 1/16" to 1/2" (1.6 to 13 mm)
May be used for both floor and wall installations
Interior and exterior applications
Residential and commercial applications
Countertops, tub surrounds, showers and high traffic areas
Submerged conditions (swimming pools, spas, water features and
fountains)
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile
Impervious porcelain and glass tile
Brick and thin brick
Precast terrazzo
Natural stone tile
Composition of Product
Prism® grout is a blend of specialty cements, recycled aggregates and
chemicals.
Benefits of Product in the Installation
Hard, dense grout joints
Resists shrinking, cracking, powdering and wear
Consistent color without shading or efflorescence
Cures quickly, developing high early strength
32% lighter than typical grouts; excellent handling characteristics
Contains 15% (by weight) post-consumer recycled material
Limitations to the Product
Should not be installed when ambient or surface temperature is lower
than50°F(10°C)orhigherthan100°F(38°C).
Some ceramic, glass, metal, marble or stone tiles can be scratched or
damaged by the lightweight aggregate filler. Perform a test on a small
area prior to use. Polyblend®NonSandedGrout may be appropriate
for joints up to 1/8" or for tile not suited for sanded grout.
Tile or stone with high absorption, surfaces that are porous or rough,
textured surfaces and some types of porcelain tile may require sealing
prior to grouting to prevent possible staining. Use AquaMix®Grout
Release or Tilelab®SurfaceGard®Sealer to prevent staining when
required.
Not for use in either industrial applications or in areas subjected to
harsh or continuous chemicals, high heat or high-pressure cleaning.
For heavy industrial tile installations, use CEG-IG 100% Solids Epoxy
Grout.
Chemicals in salt-based pool filtration systems can cause a reaction
with blue, green and red grouts. Contact Technical Services for
recommendations.
Not for use in movement joints or changes of plane in the tile
installation. In these areas, use an appropriate caulk or sealant such
as Commercial 100% Silicone Caulk or Polyblend®CeramicTileCaulk.
Packaging
17 lb (7.71 kg) box containing two (2) 8.5 lb (3.85 kg) sealed bags
Available in 40 standard colors. Color matching is available.
Prism®ColorConsistentGrout
Published Date: 6/28/2017