SDS
Conforms to OSHA HazCom 2012 Standard and CPR
SAFETY DATA SHEET
clothing and wash it before reuse. If skin irritation occurs:
Get
medical advice/attention. If in eyes: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to
do.
Continue rinsing. Immediately call a poison center/doctor. If exposed
or concerned: Get medical advice/attention. If
inhaled: Remove person to
fresh air and keep comfortable for
breathing. Call a poison
center/doctor if you feel unwell.
Storage:
Store locked up. Store in a well-ventilated place. Keep container
tightly closed.
Disposal:
Dispose of contents and container in accordance with all local,
regional, national and international regulations.
2.3
ADDITIONAL INFORMATION
Hazards not otherwise classified:
Not applicable.
78 % of the mixture consists of ingredient(s) of unknown acute toxicity.
WHMIS Classification(s):
Class D2A - Carcinogenicity
Class D2A - Chronic Toxic Effects
Class D2B - Skin/Eye Irritant
WHMIS Hazard Symbols:
WHMIS Signal Word:
WARNING
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1 MIXTURES
Ingredient
CAS No
Wt. %
Portland cement
65997-15-1
20 - 40
Glass, oxide, chemicals
65997-17-3
10 - 30
Calcium carbonate
1317-65-3
10 - 30
Cement, Alumina, Chemicals
65997-16-2
10 - 30
Calcium Sulfate Anhydrite
14798-04-0
0 - 7
Calcium Sulfate
7778-18-9
0 - 7
Ethylene Vinyl Acetate Copolymer
24937-78-8
3 – 7
Gypsum
13397-24-5
1 – 5
Silica, crystalline, quartz
14808-60-7
0.1 – 1
Lithium Carbonate
554-13-2
0.1 – 1
The exact percentage (concentration) of composition has been withheld as a trade secret in
accordance with paragraph (i) of §1910.1200.
Section 4: FIRST- AID MEASURES
4.1
DESCRIPTION OF THE FIRST AID MEASURE
Eye:
In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. If easy to do, remove contact lenses, if worn. Get
medical attention immediately.
Skin:
In case of contact, immediately flush skin with plenty of water.
Trade Name: Prolite Rapid Setting Mortar
Print date: 2014-01-22
Page 2 of 10