MSDS

Conforms to OSHA HazCom 2012 Standard and WHMIS
SAFETY DATA SHEET
Page 5 of 10
Peel & Stick Primer Print Date: 29-May-14
Engineering Controls:
Use general industrial hygiene practice.
8.3 INDIVIDUAL PROTECTION MEASURES
8.3a. Personal Protective Equipment:
i. Eye/Face Protection: Wear approved eye [properly fitted dust- or splash-proof chemical
safety goggles/face (face shield)] protection as a precaution.
ii. Skin Protection:
1. Hand Protection: Wear suitable gloves as a precaution.
2. Body Protection: Not applicable.
iii. Respiratory Protection: Not applicable.
iv. General Health and Safety Measures: Handle according to established industrial hygiene
and safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.):
White Liquid
Odor:
Faint aromatic
Odor Threshold:
Not available
pH:
8.4 – 9.4
Melting point/Freezing point:
Not applicable
Initial boiling point and boiling range:
Not available
Flash point:
Not available
Evaporation rate (Water=1):
Not available
Flammability:
Not flammable
Upper Flammability/Explosive Limit:
Not available
Lower Flammability/Explosive Limit:
Not available
Vapor Pressure
23 hPa @ 20°C
Vapor Density:
Not available
Relative Density:
0.9 – 1.1
Solubility in Water:
Insoluble but miscible in all proportions
Partition coefficient: n-octanol/water:
Not available
Auto-ignition temperature:
Not available
Decomposition Temperature:
Not available
Viscosity (cps):
100 – 1,000 mPa’s
VOC Content:
< 5 g/L
Section 10: STABILITY AND REACTIVITY
10.1. REACTIVITY
No dangerous reaction known under conditions of normal use.