MSDS

Conforms to OSHA HazCom 2012 Standard and CPR
SAFETY DATA SHEET
Trade Name: Urethane Caulk Print date: 2013-06-20
Page 2 of 9
Response:
If exposed or concerned: Get medical advice/attention. If on skin:
Wash with plenty of water. Take off contaminated clothing and wash
it before reuse. If skin irritation occurs: Get medical advice/attention.
If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye
irritation persists: Get medical advice/attention.
Storage:
Store locked up.
Disposal:
Dispose of contents and container in accordance with all local,
regional, national and international regulations.
2.3 ADDITIONAL INFORMATION
Hazards not otherwise classified
:
Not applicable.
97 % of the mixture consists of ingredient(s) of unknown acute toxicity.
WHMIS Classification(s):
Class D2A - Carcinogenicity
Class D2A - Teratogenicity and Embryotoxicity
Class D2B - Skin/Eye Irritant
WHMIS H
azard Symbols:
WHMIS
Signal Word:
WARNING
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1 MIXTURES
Ingredient
CAS No
Wt. %
Xylene 1330-20-7 1 - 5
Ethylbenzene 100-41-4 0.1 - 1
The exact percentage (concentration) of composition has been withheld as a trade secret in
accordance with paragraph (i) of §1910.1200.
Section 4: FIRST- AID MEASURES
4.1 DESCRIPTION OF THE FIRST AID MEASURE
Eye:
In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. If easy to do, remove contact lenses, if worn. If
irritation persists, get medical attention.
Skin:
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Wash clothing before
reuse. Call a physician if irritation develops and persists.
Inhalation:
If breathing is difficult, remove victim to fresh air and keep at rest in a
position comfortable for breathing. Get medical advice/attention if
you feel unwell.