MSDS

MATERIAL SAFETY DATA SHEET
StainBlocker
3 / 6
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient
OSHA
-
PEL
ACGIH
-
TLV
Pyrithione zinc Not available. Not available.
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection:
Wear eye/face protection.
Hand Protection:
Wear suitable gloves.
Skin and B
ody
P
rotection:
Wear suitable protective clothing.
Respiratory Protection:
In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations:
Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Homogeneous liquid.
Color:
Milky white.
Odo
u
r:
Mild ammonia.
Odo
u
r Thre
shold:
Not available.
Physical State:
Liquid.
pH
:
9.3
Viscosity:
7 cps, Brookfields #1 @ 20 rpm
Freezing Point
:
< 0 °C (< 32 °F)
Boiling Point
:
~ 100 °C (~ 212 °F)
Flash Point
:
Not available.
E
vaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Grav
ity:
1.02
Solubility
in W
ater:
Complete.
Coefficient of Water/Oil
Distribution:
Not available.
Auto
-
ignition Temperature:
Not available.
Percent Volatile,
wt. %:
86% (water)
VOC content, wt. g/L
:
0 g/L