SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
Page 4 of 11
SpeedSet™ Fortified Thin-Set Mortar
5.2a. Suitable Extinguishing Media:
Treat for surrounding material.
5.2b. Unsuitable Extinguishing Media:
Not Available
5.3 SPECIFIC HAZARDS ARISING FROM THE CHEMICAL
5.3a. Products of Combustion:
May include, and are not limited to: oxides of carbon and hydrogen sulfide
5.3b. Explosion Data
i. Sensitivity to Mechanical Impact:
Not Available
ii. Sensitivity to Static Discharge:
Not Available
5.4 SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS
Keep upwind of fire. Wear full fire fighting turn-out gear(full bunker gear) and respiratory protection
(SCBA).
Section 6: ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.2 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Methods for Containment:
Recover all usable material. Pick up large pieces, and then place in
a suitable container. Do not flush to sewer or allow to enter
waterways. Use appropriate Personal Protective Equipment (PPE).
Methods for Cleaning-Up:
Vacuum or sweep material and place in a disposal container.
Dispose of unwanted material properly in accordance with all local,
regional, national and international regulations.
Section 7: HANDLING AND STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING
Handling:
Use in well-ventilated areas. Wear impervious gloves and eye
protection. Do not mix with other chemical products, except as
indicated by the manufacturers. Do not get in eyes. Do not get on
skin or clothing. Do not breathe dust. Do not take internally.
General Hygiene Advice:
Use good industrial hygiene practices and wear recommended
personal protection. Launder contaminated clothing before reuse.
Wash hands before eating, drinking, or smoking.