SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
Page 6 of 11
SpeedSet™ Fortified Thin-Set Mortar
pH:
10.0 – 12.5 when wet
Melting point/Freezing point:
Not Available
Initial boiling point and boiling range:
Not Available
Flash point:
>212°F(>100°C)
Evaporation rate (Water=1):
Not Available
Flammability:
Not Flammable/Not Combustible
Upper Flammability/Explosive Limit:
Not Available
Lower Flammability/Explosive Limit:
Not Available
Vapor Pressure
Not Available
Vapor Density:
Not Available
Relative Density:
2.0 – 3.0 g/mL
Solubility in Water:
Slightly Soluble
Partition coefficient: n-octanol/water:
Not Available
Auto-ignition temperature:
Not Available
Decomposition Temperature:
Not Available
Viscosity (cps):
Not Available
VOC Content:
0 g/L
Section 10: STABILITY AND REACTIVITY
10.1. REACTIVITY
No dangerous reaction known under conditions of normal use.
10.2. CHEMICAL STABILITY
Stable under normal storage conditions. Keep dry in storage.
10.3. POSSIBILITY OF HAZARDOUS REACTION
No dangerous reaction known under conditions of normal use.
10.4. CONDITIONS TO AVOID
Heat. Incompatible materials.
10.5. INCOMPATIBLE MATERIALS
Strong acids. Strong Oxidizers.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS
Upon decomposition, this product may yield oxides of carbon and hydrogen sulfide.
Section 11: TOXICOLOGICAL INFORMATION
11.1. LIKELY ROUTES OF EXPOSURE:
Skin contact, skin absorption, eye contact, inhalation, and ingestion.
11.2. SYMPTOMS RELATED TO PHYSICAL/CHEMICAL/TOXICOLOGICAL CHARACTERISTICS:
Eye Contact:
Causes serious eye damage. Symptoms may include discomfort or
pain, excess blinking and tear production, with marked redness and
swelling of the conjunctiva.
Skin Contact:
Causes skin irritation. Handling can cause dry skin, discomfort,