SDS

Conforms to OSHA HazCom 2012 Standard and CPR
SAFETY DATA SHEET
Response:
If exposed or concerned: Get medical advice/attention. If on skin: Wash
with plenty of water. Take off contaminated clothing and wash it
before reuse. If skin irritation occurs: Get medical advice/attention.
If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor. If inhaled: Remove person to
fresh air and keep comfortable for breathing. Call a poison center/doctor
if you feel unwell.
Storage:
Store locked up. Store in a well-ventilated place. Keep container tightly
closed.
Disposal:
Dispose of contents and container in accordance with all local,
regional, national and international regulations.
2.3 ADDITIONAL INFORMATION
Hazards not otherwise classified:
Not applicable.
SpeedSet™ Fortified Thin-Set Mortar (Gray): 29 % of the mixture consists of ingredient(s) of
unknown acute toxicity.
SpeedSet™ Fortified Thin-Set Mortar (White): 34 % of the mixture consists of ingredient(s) of
unknown acute toxicity.
WHMIS Classification(s):
Class D2A - Carcinogenicity
Class D2A - Chronic Toxic Effects
Class D2B - Skin/Eye Irritant
WHMIS Hazard Symbols:
WHMIS Signal Word:
WARNING
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1 MIXTURES
Ingredient
CAS No
Wt. %
Silica, crystalline, quartz
14808-60-7
30 - 60
Portland cement
65997-15-1
15 - 40
Cement, alumina, chemicals
65997-16-2
10 - 30
1
5 - 10
2
Ashes (residues)
68131-74-8
5 - 10
1
Gypsum
13397-24-5
1 - 5
Calcium magnesium tetrahydroxide
39445-23-3
1 - 5
Calcium magnesium hydroxide oxide
58398-71-3
1 - 5
Calcium hydroxide
1305-62-0
1 - 5
Aluminum oxide
1344-28-1
0.1 - 1
1
3 - 7
2
Magnesium hydroxide
1309-42-8
0.5 - 1.5
Magnesium oxide
1309-48-4
0.5 - 1.5
1
1 - 5
2
Trade Name: SpeedSet™ Fortified Thin-Set Mortar Print date: 2013-12-23
Page 2 of 12