SDS

Conforms to OSHA HazCom 2012 Standard and CPR
SAFETY DATA SHEET
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1
CONTROL PARAMETERS
Exposure Guidelines
Occupational Exposure Limits
Ingredient
OSHA-PEL
ACGIH-TLV
Silica, crystalline, quartz
((10 mg/m
3
)/(%SiO +2) TWA (resp));
2
((30 mg/m
3
)/(%SiO +2) TWA (total));
2
((250)/(%SiO
2
+5) mppcf TWA (resp))
0.025 mg/
Portland cement
15 mg/m³ (total); 5 mg/ (resp)
1 mg/ (no asbestos and
<1% crystalline silica,
respirable fraction)
Cement, alumina,
chemicals
Not available.
Not available.
Ashes (residues)
Not available.
Not available.
Gypsum
15 mg/m
3
TWA (total dust);
5 mg/m
3
TWA (respirable fraction)
10 mg/m
3
Calcium magnesium
tetrahydroxide
Not available.
Not available.
Calcium magnesium
hydroxide oxide
Not available.
Not available.
Calcium hydroxide
15 mg/m³ (total); 5 mg/ (resp)
5 mg/m³
Aluminum oxide
15 mg/m
3
(total) TWA 5 mg/m
3
(resp)
10 mg/m
3
Magnesium hydroxide
15 mg/m
3
10 mg/m
3
Magnesium oxide
15 mg/m
3
10 mg/m
3
Kaolin
15 mg/m
3
2 mg/m
3
Lithium carbonate
Not available.
Not available.
Slags, ferrous metal,
blast furnace
Not available.
Not available.
Calcium oxide
5 mg/m³
2 mg/m
3
8.2
EXPOSURE CONTROLS
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
8.3
INDIVIDUAL PROTECTIVE MEASURES
Personal Protective Equipment:
Eye/Face Protection:
Wear approved eye (properly fitted dust- or splash-proof chemical safety
goggles) / face (face shield) protection.
Skin Protection:
Hand Protection:
Wear chemical resistant gloves.
Body Protection:
Wear suitable protective clothing.
Respiratory Protection:
A NIOSH approved dust mask or filtering facepiece is recommended in
poorly ventilated areas or when permissible exposure limits may be
exceeded. Respirators should be selected by and used under the direction
of a trained health and safety professional following requirements found in
OSHA’s respirator standard (29 CFR 1910.134) and ANSI’s standard for
respiratory protection (Z88.2).
Trade Name: SpeedSet™ Fortified Thin-Set Mortar Print date: 2013-12-23
Page 5 of 12