Installation Guide

BEFORE YOU BEGIN
For efficiency lay SimpleMat from your Overlap SimpleMat edges 1/8" to 1/4"
longest start to end point. (3 - 6 mm). Overlapping is shaded
in illustration.
APPLYING SIMPLEMAT TO COUNTERTOP
Apply the flat adhesive side of SimpleMat Flatten air bubbles and creases. Cover all surfaces to be tiled.
to counter.
Cut SimpleMat as needed. Cut corner from end of mat to facilitate
folding of corner.
SIMPLEMAT LAYOUT FOR COUNTERTOP
CUT AS NEEDED
COUNTERTOPS LAYOUT & APPLICATION
Step 2
Countertops
3
PREPARE YOUR COUNTERTOP
Clean dust and debris. Wipe with a Ensure a flat, square counter or wall surface. Do not apply to uneven surfaces.
damp sponge.
Step 1
9
26
2