Installation Guide

SETTING TILE
Clean back of tile or stone with a damp Remove white plastic from SimpleMat. Lightly set tile into place using tile spacers.
sponge. Tile must be dry before setting.
Adjust tiles as needed. Press tile firmly to lock into place. Ready to grout with SimpleGrout or,
Fusion Pro. Grout your installation within
24 hours of setting tile over SimpleMat.
S
tep
3
24
hours
Seal Beach, CA 90740
800-272-8786
custombuildingproducts.com
©2013
www.thesimplemat.com
CODE 62323 2/13N
Countertops, Backsplashes & Shower Walls
V-CAP TILE
:
L-shaped tile specifically Because v-cap may not fit squarely on Do not apply excessive filler material
used to cover the front edge of a countertop. countertop, use grout or SimpleFix Ceramic as it will interfere with bond.
Tile & Fixture Caulk to fill voids between
v-cap and countertop.
BULL NOSE TILE
: Regular shaped tile with First apply tile to front of counter. Ensure that counter tile overlaps and
a rounded edge used for counter edge and use spacers for a uniform grout joint.
other transitions.
TIPS BEFORE YOU SET YOUR COUNTERTOP — USING V-CAP OR BULL NOSE TILE
3
OR