MSDS

MATERIAL SAFETY DATA SHEET
Simplemat
1 / 5
Section 1: PRODUCT AND COMPANY IDENTIFICATION
Product Name:
Simplemat
Product Use:
Adhesive.
Manufacturer/Supplier:
Custom Building Products
13001 Seal Beach Blvd
Seal Beach, CA 90740
Phone Number:
[phone]
E
mergency Phone:
INFOTRAC 1-800-535-5053 (US and Canada)
INTERNATIONAL + 1-352-323-3500
Date of
P
reparation:
August 20, 2009
Revision Date:
April 9, 2012
Section 2: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Not applicable.
Potential Health Effects: See Section 11 for more information.
Likely Routes of Exposure:
Skin contact.
Eye:
Not applicable under normal conditions of use.
Skin:
Not applicable under normal conditions of use.
Ingestion:
Not applicable under normal conditions of use.
Inhalation:
Not applicable under normal conditions of use.
Chronic Effects:
Not available.
Signs and Symptoms:
Due to the physical nature of this product, eye contact is not possible.
No hazardous effects from skin contact.
Medical Conditions Aggravated By Exposure: Asthma. Allergies.
Target Organs:
Skin.
Potential Environmental Effects: Not considered to be harmful to aquatic life. See Section 12
for more information.
Section 3: COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient
CAS #
Wt.
%
Not applicable.
Section 4: FIRST AID MEASURES
Eye Contact:
In case of contact, flush eyes with plenty of water. If easy to do, remove contact
lenses, if worn.
Skin Contact:
If irritation occurs, flush skin with plenty of water. Call a physician if irritation persists.
Inhalation:
Not a normal route of exposure. If symptoms develop, remove to fresh air. Get
medical attention if condition worsens.
Ingestion:
May result in obstruction and irritation if ingested. Get medical attention.
General Advice:
In case of accident or if you feel unwell, seek medical advice immediately
(show the label or MSDS where possible).