MSDS

MATERIAL SAFETY DATA SHEET
Tile Lab Gloss Sealer and Finish
Page 3 of 6
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory
equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Clear.
Color:
White.
Odour:
Characteristic.
Odour Threshold:
Not available.
Physical State:
Liquid.
pH:
8-9
Viscosity:
Water thin.
Freezing Point:
Not available.
Boiling Point:
~ 100 °C (~ 212 °F)
Flash Point:
Not available.
Evaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Gravity:
1.1
Solubility in Water:
Partial.
Coefficient of Water/Oil Distribution:
Not available.
Auto-ignition Temperature:
Not available.
Percent Volatile, wt. %:
75
VOC content, wt. %:
74g/l
Section 10: STABILITY AND REACTIVITY
Stability: Stable under normal storage conditions.
Conditions of Reactivity: Heat. Incompatible materials.
Incompatible Materials: Oxidizers.
Hazardous Decomposition Products: May include, and are not limited to: oxides of carbon.
Possibility of Hazardous Reactions: No dangerous reaction known under conditions of
normal use.