MSDS

MATERIAL SAFETY DATA SHEET
Tile Lab Gloss Sealer and Finish
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear.
Color: White.
Odor: Characteristic.
Odor Threshold: Not available.
Physical State: Liquid.
pH: 8.0-9.0
Viscosity: Not available.
Freezing Point: ~ 0 ºC (~ 32 ºF).
Boiling Point: ~ 100 °C (~ 212 °F).
Flash Point: Not available.
Evaporation Rate: Not available.
Lower Flammability Limit: Not available.
Upper Flammability Limit: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Relative Density: ~ 1 g/mL.
Solubility in Water: Partially Miscible.
Coefficient of Water/Oil Distribution: Not available.
Auto-ignition Temperature: Not available.
Percent Volatile : ~ 80%.
VOC content : 90 g/L (Calculated).
Section 10: STABILITY AND REACTIVITY
Stability: Stable under normal storage conditions.
Conditions of Reactivity: Heat. Incompatible materials.
Incompatible Materials: Oxidizers.
Hazardous Decomposition Products: May include, and are not limited to: oxides of carbon.
Possibility of Hazardous Reactions: No dangerous reaction known under conditions of normal use.
3 / 6