MSDS

MATERIAL SAFETY DATA SHEET

Tile Lab Grout and Tile

Sealer

Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Guidelines

Exposure Limits

Ingredient OSHA-PEL ACGIH-TLV

Potassium methylsilanetriolate Not available. Not available.

Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,

fume, vapor, etc.) below recommended exposure limits.

Personal Protective Equipment:

Eye/Face Protection: Wear eye/face protection.

Hand Protection: Wear suitable gloves.

Skin and Body Protection: Wear suitable protective clothing.

Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.

General Hygiene Considerations: Handle according to established industrial hygiene and

safety practices.

Section 9: PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Clear.

Color: Colorless.

Odor: Low odor.

Odor Threshold: Not available.

Physical State: Liquid.

pH: 11.25-11.75

Viscosity: Water thin.

Freezing Point: ~ 0 ºC (~32 ºF).

Boiling Point: ~ 100°C (~ 212°F).

Flash Point: Not available.

Evaporation Rate: Not available.

Lower Flammability Limit: Not available.

Upper Flammability Limit: Not available.

Vapor Pressure: Not available.

Vapor Density: Not available.

Relative Density: ~ 1 g/mL.

Solubility in Water: Miscible.

Coefficient of Water/Oil Distribution: Not available.

Auto-ignition Temperature: Not available.

Percent Volatile: ~ 95%

VOC content: 0 g/L (Calculated).

3 /