MSDS

MATERIAL SAFETY DATA SHEET
Tile Lab Heavy-Duty Stripper & Cleaner
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient
OSHA-PEL
ACGIH-TLV
Monoethanolamine
Ethylene glycol monobutyl ether
3 ppm
50 ppm
3 ppm
20 ppm
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear.
Color: Colorless to light yellow.
Odor: Slight ammonia.
Odor Threshold: Not available.
Physical State: Liquid.
pH: 11.5-12.5
Viscosity: Not available.
Freezing Point: Not available.
Boiling Point: ~ 100°C (~ 212°F)
Flash Point: Not available.
Evaporation Rate: Not available.
Lower Flammability Limit: Not available.
Upper Flammability Limit: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Relative Density: ~ 1 g/mL.
Solubility in Water: Miscible.
Coefficient of Water/Oil Distribution: Not available.
Auto-ignition Temperature: Not available.
Percent Volatile : ~95%.
VOC content: 133 g/L (Calculated)
.
3 / 6