MSDS

MATERIAL SAFETY DATA SHEET
Travertine Filler
September 25, 2012
3 / 7
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient
OSHA
-
PEL
ACGIH
-
TLV
Silica, crystalline, quartz
((10 mg/m
3
)/(%SiO
2
+2) (resp));
((30 mg/m
3
)/(%SiO
2
+2) (total));
((250)/(%SiO
2
+5) mppcf (resp)) 0.025 mg/m³
Mica 20 mppcf
10 mg/m³ (total);
3 mg/m³ (resp)
Titanium dioxide 15 mg/m
3
(total dust) 10 mg/m³
Ethylene glycol 50 ppm 50 ppm
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection:
Wear eye/face protection.
Hand Protection:
Wear suitable gloves.
Skin and B
ody
P
rotection:
Wear suitable protective clothing.
Respiratory Protection:
In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations:
Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Paste-like compound.
Colo
u
r:
Not available.
Odo
u
r:
Mild odour.
Odo
u
r Threshold:
Not available.
Physical State:
Liquid.
pH
:
8-10
Viscosity:
Viscous.
Freezing Point
:
Not available.
Boiling Point
:
Not available.
Flash Point
:
Not available.
E
vaporatio
n Rate:
< 1 (Ether = 1)
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Gravity:
Not available.
Solubility
in W
ater:
Not available.
Coefficient of Water/Oil
Distribution:
Not available.