Specification

TILING 09 30 00 Setting / TDS-133
1 Product Name
Tile Repair Mortar
2 Manufacturer
Custom®BuildingProducts
3 Product Description
Used to replace any type of tile, ceramic or porcelain fixture. Polymer-
modified for maximum bond strength. This unique product allows you
to replace broken tile underwater. No need to drain fountains, pools or
spas. Easy to use, cures ultra-fast and develops high early strength for
quick installations. Grout in just two hours and traffic in four. Also
excellent for quick installation of any stone or tile. Formulated with
ControlledCureTechnology®,whichinhibitswarpingandstainingof
moisture-sensitive stone and tile that occurs when installed with
traditional thin-set mortars. Exceeds ANSI A118.4 and 118.11 without
the need for additives.
Suitable Tile Types
For replacing:
Ceramic, mosaic, quarry or porcelain tile
Brick and mini brick
Cement-based precast terrazzo
Natural stone tile
Ceramic, synthetic, or porcelain soap dishes, shampoo shelves, towel
bars
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard® Lite cement backerboard
Liquid applied waterproofing membranes such
as RedGard® and Custom® 9240
Crack prevention sheet membranes such as Crack Buster® Pro
Exterior Grade Plywood (interior residential and light commercial dry
areas)
Gypsum wallboard (interior dry areas)
Existing ceramic tile (scarified)
Fully-bonded sheet vinyl flooring (scarified)
Plastic laminates (scarified)
Cutback adhesive (see preparation instructions)
Limitations to the Product
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass,
plastic or OSB panels.
When setting moisture sensitive natural stone, cement or agglomerate
tileuseEBMLite™EpoxyBondingMortar100%SolidsorCEGLite™
100% Solids Commercial Epoxy Grout.
Donotusetoinstallresinbackedstone;useEBMLite™EpoxyBonding
Mortar100%Solids,CEGLite™100%SolidsCommercialEpoxyGrout
orcontactCustom's®TechnicalServicesforrecommendations.
When setting glass tile larger than 6" x 6" (15 x 15 cm), contact
Custom's®TechnicalServicesforrecommendations.
When setting dimensional stone larger than 12" x 12" (30 x 30 cm),
contactCustom's®TechnicalServicesforrecommendationsregarding
subfloor deflection requirements.
Packaging
4 Technical Data
Applicable Standards
AmericanNationalStandardsInstitute(ANSI)—ANSIA108.5,A118.5,
A118.4, A118.15 and A118.11 of the American National Standards for
the Installation of Ceramic Tile ASTM International (ASTM)
ASTM C109 Standard Test Method for Compressive Strength of
Hydraulic Cement Mortars (Using 2-in or [50-mm] Cube Specimens)
ASTM C627 Standard Test Method for Evaluating Ceramic Floor Tile
Installation Systems Using the Robinson-Type Floor Tester
Resilient Floor Covering Institute - (RFCI) Recommended Work
Practices for Removal of Resilient Floor Coverings
Tile Council of North America (TCNA) - TCNA Handbook for Ceramic
Tile Installation, TCNA Method EJ171
ISO 13007-2
Tile Repair Mortar
Published Date: 1/17/2014