Installation Guide

ORDERING INFORMATION
TECHNICAL DATA
Meets or exceeds ANSI A118.6 specifications.
CLEANUP
Clean tools and hands with water before material dries.
CARE AND MAINTENANCE
Mold and mildew can grow on dirt, food and soap scum that
can accumulate on the grout surface. Sealing the grout and
keeping it clean with TileLab
®
products will greatly inhibit
mold and mildew growth
Seal grout joints with TileLab SurfaceGard Penetrating Sealer
after grout has cured for 48 - 72 hours. For routine cleaning
use a TileL
ab cleaner.
SAFETY
Contains Portland cement. Avoid eye contact or prolonged
contact with skin. Wash thoroughly after handling. If eye
contact occurs, flush with water for 15 minutes and consult
a physician. This product contains free silica. Do not breathe
dust; wear NIOSH approved respirator.
COVERAGE
Coverage will vary depending on tile size and joint width.
Seal Beach, CA [phone] Customer Support [phone] www.custombuildingproducts.com Manufacturing facilities nationwide.
WHITE DR
Y
TILE GROUT
Applicable Standards
A118.6
W
ater Absorption:
After immersion
15%
Compressive Strength 5000 psi
SQU
ARE FOOT COVERA
GE PER LB (SQU
ARE METER PER .45 KG)
TILE SIZE JOINT WIDTH
1/16"
(1.5 MM) 1/8" (3 MM)
4
1
/4" x 4
1
/4" x 5/16"
(108 x 108 x 8 mm) 14.5 (1.35) 7.0 (.65)
6" x 6" x 1/4" (150 x 150 x 6 mm) 25.0 (2.32) 12.0 (1.12)
8" x 8" x 1/4" (200 x 200 x 6 mm) 33.0 (3.07) 17.0 (1.58)
12" x 12" x 3/8" (300 x 300 x 9 mm) 33.1 (3.07) 17.1 (1.58)
ITEM CODE
SIZE COLOR PACKAGE
USA WDG1 1 lb. (.45 kg) White Box
USA WDG5 5 lb. (2.27 kg) White Box
USA
WDG25 25 lb. (11.34 kg) White Bag
Canada CWDG25 25 lb. (11.34 kg) White Bag