TDS

White Dry Non-Sanded Grout / TDS-178
1 Product Name
White Dry Non-Sanded Grout
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
White Dry Non-Sanded Grout is formulated for grouting porous floor
and wall tiles with joints up to 1/8" (3 mm) wide. Ideal for use with
glazed tile and polished marble that can be scratched by sanded grout.
It can be used for interior and exterior applications. Meets ANSI
A118.6 specifications.
Key Features
Won't scratch highly glazed or polished tile or stone
Uses
For grouting soft glazed tile, marble or other polished stone that could
be scratched by sanded grouts.
For grout joints up to 1/8" (3 mm).
Use on floors, countertops, walls, ceilings, showers, fountains and
pools.
For interior or exterior installations.
Suitable Tile Types
Non-vitreous tile
Natural stone tile
Composition of Product
Portland cement and fine fillers.
Benefits of Product in the Installation
Economical Grout
Forjointsupto1/8”
Non-shrinking
Limitations to the Product
Should not be installed when ambient or surface temperature is lower
than50°F(10°C)orhigherthan100°F(38°C).
Tile or stone with high absorption, surfaces that are porous or rough,
textured surfaces and some types of porcelain tile may require sealing
prior to grouting to prevent possible staining. Use Tilelab®
SurfaceGard®Sealer or AquaMix®GroutRelease to prevent staining
when required.
Color variation can occur due to tile type, tile porosity, jobsite
conditions, application and cleaning techniques. Variation can be
minimized by following directions and using as little water as possible
for cleanup.
Not for use in either industrial applications or in areas subjected to
harsh or continuous chemicals, high heat or high-pressure cleaning.
For heavy industrial tile installations, use CEG-IG 100% Solids Epoxy
Grout.
Not for use in movement joints or changes of plane in the tile
installation. In these areas, use an appropriate caulk or sealant such
as Commercial 100% Silicone Caulk or Polyblend®CeramicTileCaulk.
Packaging
1 lb (.45 kg) can
5 lb (2.27 kg) box
25 lb (11.34 kg) bag
4 Technical Data
Applicable Standards
Meets or exceeds ANSI A118.6 specifications.
Approvals
Polyblend®SandedGroutmeetsorexceedsANSIA118.6standards.
White Dry Non-Sanded Grout
Published Date: 3/30/2018