User manual

1. INSTALLATION AND USE
11-
DPT100-S
DC IN
1
1.1 CONNECTIONS
1.1.1 Power Supply
For the Battery Recharger/Power Supply and serial connection, the printer is
equipped with a connecting cable (fig. 1.2) that comes packed with the
printer and has a double connection system. On one side is a 9-pin female
connector (fig. 1.2.A) for the serial port; on the other side of the same
connector is a RJ11 connector (fig. 1.2.B) and a jack (fig. 1.2.C) for
connection to an external adapter (fig. 1.2.D).
To supply power to the printer and for the serial connection, use the
connection cable (fig. 1.2) that comes packed with the printer and following
the instructions listed in the paragraph 1.1.3.
(Fig.1.2.A)
(Fig.1.1)
(Fig.1.2.C)
(Fig.1.2.D)
(Fig.1.2.B)