CSW0970 Enforcer 7 Direct Drive Setup Sheet - Rubber Tire
Baseline kit set-up - rubber tire
x
x
Sticker HB
Sticker HB
Sticker HB
Sticker HB
Simple Green
Break tires in before racing.
8
8
9
9
30
30
30
30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
none
none
-1
+1
0
0
+1
-1
4 in
0
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
*
*
*
*
*
*
*
*
For higher bite tracks, move rear camber links to * holes and add front roll center shims (under kingpin ball.) Use droop screws to limit
x
1 out
x
Add front sway bar #4228 for added stability in middle of corners. Rear wheel spacers part #7208.
front uptravel on high bite tracks. Use high wing slot for low to medium bite tracks, low wing slot for higher bite tracks.
Replace rear suspension mount shims with anti-squat spacers for more forward drive under power.
*
*
*
*
*
*
11mm
12mm
11mm
12mm
18mm
19mm
18mm
19mm
55.2 oz
15.35
15.05
11.60
13.30
55%
52%
48%
Orange
Orange
Orange
Orange
If track is abrasive, use standard
compound Sticker tires.
.12
.04
.38
.38
2.45
2.45
2.85
2.85