Owner’s Manual
Thank You! Thank you for purchasing the Customizer TM URC-300 Pre-Programmed and Learning Remote Control. The Quick Setup DVD tutorial supplied with the Customizer demonstrates the process of setting up and automating a home entertainment system. Watch the DVD first to familiarize yourself with the capabilities of the Customizer and the setup process.
Table of Contents Getting Started ......................................................... 2 Button Layout ........................................................... 3 Basic Setup ............................................................... 5 Pre-Programmed Method .......................................... 5 Learning Method ..................................................... 10 Volume Control Punch Through ............................. 13 Advanced Operation ...........................................
The Customizer Getting Started Congratulations! You’ve purchased one of the most advanced and easy to setup control systems available. The Customizer’s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the Customizer is enter which brands and models you own. If you own a component too new to be in the library, the Customizer uses advanced DoubleTapTM Learning technology to quickly set each Customizer button, one at a time.
URC-300 Button Layout TITLE LIGHT Button Touch the Screen to use the Buttons on the screen. PAGE Buttons ) ( change the page of buttons displayed. MAIN Button takes you to the MAIN Menu.
The Customizer Selecting a New DEVICE Changes All Button Commands Instantly The Customizer can operate fifteen different devices even though it is only one remote control. Let’s try it now! Press the MAIN button, then press the TV DEVICE button. TV DEVICE Button MAIN Button The top of the screen changes from MAIN to TV. Now all of the buttons change their function to operate a TV. Press the page buttons. Watch the labels of the display buttons change with each press.
URC-300 Basic Setup You can start setting up your Customizer using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the Customizer are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method. Pre-Programmed Method 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.
The Customizer 4 Press the P-PRO button to select the Pre-Programmed Method. P-PRO Button The screen changes to show the first page of the MAIN menu of Devices: Devices Devices FAV (Not a Device) Press either of the Page buttons ( the second list of eight devices. 5 ) to display In this step you choose the name of the device you’d like to setup. Use the cursor UP or DOWN buttons to change the flashing name. When it is correct, press the SELECT button.
URC-300 6 In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT. SELECT If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a second DVD player), use the UP and DOWN buttons to change the flashing name to the correct type of component. Note: Each name that appears in the display may include several types of components.
The Customizer 8 When the component turns off, save the code number you entered by pressing the SAVE button that appears on the screen. Code Number You Entered SAVE Button Note: If your component fails to turn off after you have entered all the code numbers listed for your brand, you can scan through the other brands in the table by alternately pressing the UP (or DOWN) and POWER OFF buttons. Scan Down to the previous Code Number. 9 Scan Up to the next Code Number.
URC-300 10 When the display shows “MAIN”, you are back in normal operating mode. Now it’s time to test all the buttons. If some buttons don’t work, try repeating steps 1-9, to see if you can improve the match to your component. For Example: My Sony TV powered off with TV code number 139. However the number buttons didn’t work when I tested them. So, I repeated steps one to ten, using other code numbers and eventually discovered that when code number 185 is set, all the buttons work perfectly.
The Customizer Learning Method The Customizer can learn commands from your old remote controls one-button-at-a-time by following these simple steps: 1 Line-up the Customizer with your old remote control, head-to-head, one or two inches apart. 2 Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now. Note: You have 30 seconds to perform a step while you are in SETUP mode.
URC-300 4 The display will show a list of the first seven devices. 5 Select the device you would like to teach commands to by pressing the Device button. Devices Devices FAV (Not a Device) 6 Press any button you want to teach a command to. Press any Button. Note: If you don’t see the display button you would like to teach, use the PAGE buttons. The only buttons you can’t teach are the PAGE and MAIN buttons. Once you press a button, the top of the display will change from “LEARN” to “READY”.
The Customizer 7 Press and hold the button on your old remote control until the display changes to “RETRY”. 8 Press and hold the same button on your old remote control once again. The Customizer’s unique DoubleTap learning technology ensures compatibility with the widest variety of remote controls ever! 9 Once you have taught the button twice, the display will change to either “GOOD” or “FAILED”. If the “GOOD” label appears on top of the display and “SAVED” flashes on the bottom, you were successful.
URC-300 Volume Control Punch Through In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Customizer to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the Customizer’s AUDIO device to adjust the volume.
The Customizer 4 The bottom of the display flashes ”PUNCH TO”. Press the device button for the device that doesn’t have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands. Select the Device you want to “Punch To” Note: If you wish to PUNCH to the MAIN device, press the POWER OFF button at this time. 5 The bottom of the display will then flash “PUNCH FROM”. Now you select the device that has the volume commands you want (i.e.
URC-300 Advanced Operation Setting Backlight Options You can adjust the amount of time that the Customizer backlight stays on by entering the SETUP mode and proceeding to page two (using the PAGE UP button), then pressing the LIGHT button on the display (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 seconds). After making your selection, press the SAVE button.
The Customizer Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time. MAIN Button Cursor Up & Down Buttons Contrast set high. Contrast set low. Transmitting (Busy Signal) Icon When a command is being transmitted, an icon will appear in the top right corner of the display.
URC-300 Advanced Setup After you’ve finished all your basic setup, you can choose to make operation easier by customizing the Customizer just the way you want, using the Advanced Setup features described in this section. Editing Button Labels You can change the name of any of the display buttons (including Favorite Channels) by following these steps: 1 Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”.
The Customizer 4 The screen displays the list of devices and “EDIT” will appear at the top of the screen. Navigate to the device and page where there is a button label you want to EDIT, selecting between the FAV, MAIN, DEVICE; then using the PAGE button. Note: If you wish to change the name of a DEVICE button, press the Page Up button twice. The top of the display changes to MAIN, and you can navigate to MAIN page 1 or page 2 before going on to Step 5. 5 Press the button you wish to edit.
URC-300 6 Change the character by using any of the number keys. Each press of the same number button selects the next character of that number’s group, as shown below. A,B,C,1 J,K,L,4 S,T,U,7 D,E,F,2 M,N,O,5 V,W,X,8 G,H,I,3 P,Q,R,6 Y,Z,9 7 Once the character you want appears, move to the next space by pressing the RIGHT cursor button. 8 When you are finished editing the button, press the button you edited and “SAVED” will flash at the bottom of the display.
The Customizer Macro Button Setup Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Customizer! What would normally take three remotes and three button pushes, the Customizer can accomplish with the press of one button. We call that a “Macro”.
URC-300 4 Press the button you want to set as a Macro button. The top of the screen will display the label of the button you selected. At the bottom of the screen it displays “STEP0”, indicating that no macro steps have been entered yet. 5 Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen.
The Customizer Favorite Channel Setup Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel buttons, you can make TV, cable or satellite operation fun and easy. To setup a Favorite Channel button, follow these steps: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the Customizer will time out automatically. 2 Press the FAV display button.
URC-300 6 Press each of the number buttons for the channel. Note: If a number is repeated when setting the channel (for example, channel “33” or “522”) it is usually best to set a half second delay in between the identical numbers by pressing the PAUSE button. Each press of the PAUSE button increases the delay by a half second. PAUSE Button Note: Some brands of television require an ENT(Enter) command after the channel numbers. 7 Press the LIGHT button after you enter the channel number.
The Customizer Hiding and Adding Pages Each of your Customizer Devices actually contains five pages. However, only four pages are visible in the factory default setting. One page is hidden in each device. If you wish to use the hidden page, you can ADD it. If you don’t want to use some of the existing pages, you can HIDE them.
URC-300 4 “PAGE” appears at the top of the screen. Now, you can navigate to any page, using the MAIN, DEVICE, FAV, and PAGE buttons. DEVICE Buttons PAGE Buttons FAV Button MAIN Button 5 When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page displayed. When you would like to change a page’s visibility, press the LIGHT button. This page is visible. To HIDE it, press the LIGHT button. This page is hidden. To ADD it, press the LIGHT button.
The Customizer Overview of Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to the factory default condition.
URC-300 4 If you press ALL, the Customizer displays a SURE? button. After the SURE button is pressed, all the buttons will be erased. SURE Button If you press DEVICE, a list of Devices will appear. Press the device button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED. If you press KEY, you’ll have to navigate to the Device and Page you want using the MAIN, DEVICE and PAGE buttons. Press a button to erase it.
The Customizer Cloning One Customizer to Another If you own two or more Customizers, you can copy and transfer all the setup from one Customizer to another. Just follow these easy steps: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the Customizer will time out automatically. 2 Press a PAGE button to display page two of Setup. 3 Press the CLONE button. 4 Align the two Customizers head-to-head, about an inch apart.
URC-300 Recalling Pre-Programmed Settings If you didn’t write down the code numbers you setup your Customizer with, you can recall them via this simple process: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the Customizer will time out automatically. 2 Press the RECAL button. The display changes to the recall screens. Each of the four screens displays the Device Name and the Code Number.
The Customizer The Optional Expander You can use the Customizer as you would your other remote controls. It transmits very powerful line-of-sight output using infrared light commands (invisible to the naked eye). When you point the Customizer at the components, expect the range to be between 30 and 50 feet. When the remote is not pointed in the general direction of the components, the range will vary (depending on reflective surfaces, lighting, etc.).
URC-300 The Customizer sends radio signal to the Expander, which is a radio receiver. The Expander converts radio signals to standard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space. Self-adhesive “flashers” (included in the Expander kit) affix to the front panels of your components. The flashers relay infrared commands to components out-of-sight of the MRF-100 front blaster. The flashers plug into the MRF-100 rear flasher line output jacks.
The Customizer Pre-Programmed Code Notes Record the three digit codes for your system here: TV CABLE/WEB TV DVD VCR AUDIO SAT CD DVR LDP LIGHT TAPE AUX PHONO 32
URC-300 Pre-Programmed Code Tables The Customizer’s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the VCR category includes TV/VCR combo units. Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try.
TV - TVs, Plasmas, Projectors and Monitors BRAND ADMIRAL ADVENT AKAI A MARK AMPRO AMSTRAD ANAM AOC APEX DIGITAL AUDIOVOX BARCO BLAUPUNKT BROKSONIC CAIRN CANDLE CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DREAMVISION DWIN DYNASTY DYNATECH EIKI ELECTROHOME EMERSON FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE GOLDSTAR HALL MARK HITACHI HP INFINITY INFOCUS JBL JCPENNEY JENSEN JVC KEC KENWOOD KLOSS THREE DIGIT SETUP NUMBERS 072 081 161 160 247 197 1
TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND KMC KTV LG LODGENET LOEWE LOGIK LUXMAN LXI MAGNAVOX MARANTZ MATSUI MAXENT MEMOREX METZ MGA MINERVA MITSUBISHI MTC NAD NEC NIKEI ONKING ONWA OPTONICA OPTOMA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK RCA REALISTIC ROCTEC RUNCO SAMPO SAMSUNG SANYO SCEPTRE SCOTT SEARS SELECO SHARP SIEMENS SIGNATURE SOLE SONY SOUNDESIGN SPECTRICON SSS SUPRE MACY SYLVANIA THREE DIGIT SETUP NUMBERS 143 043 197 143 154 113 116 102
TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND TANDY TATUNG TECHNICS TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA TMK TOSHIBA TOTEVISION UNIVERSAL VIDEO CONCEPTS VIDIKRON VIDTECH VIEWSONIC WARDS WESTING HOUSE YAMAHA YORK YUPITERU ZENITH ZONDA THREE DIGIT SETUP NUMBERS 081 056 062 034 080 004 002 003 004 024 028 043 072 101 143 037 046 086 087 072 172 004 015 138 030 007 040 062 101 143 008 009 146 174 184 188 192 004 242 004 008 009 019 028 060 061 063 064 072 074 143 164 034 076 280 197 004 004
AUDIO (continued) - Receivers, Amps, Preamps and Tuners BRAND CINEMA SOUND CITATION CLARION COMPAQ CURTIS MATHES DELPHI DENON EIGER ELAN ENLIGHTENED AUDIO ESCIENT FANFARE FISHER FLEXTRONICS FOSGATE FOSGATE AUDIONICS GE GOLDSTAR HAFLER HARMAN KARDON HITACHI IMERGE INKEL INTEGRA JAMO JBL JCPENNEY JEFF ROWLAND JENSEN JVC KENWOOD KINERGETICS KLH KOSS KRELL KYOCERA LEXICON LINN LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MERIDIAN MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIRO NILES ONKYO OPTIMUS THREE DIGIT SETU
AUDIO (continued) - Receivers, Amps, Preamps and Tuners BRAND OUTLAW PANASONIC PARASOUND PHAST PHILIPS PIONEER POLKAUDIO PROCEED RCA REALISTIC REQUEST REVOX ROTEL RUSSOUND SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SONY SOUNDESIGN SOUNDMATTERS SOUNDSTREAM SSI SUMO SUNFIRE TAEKWANG TEAC TECHNICS THETA DIGITAL TOSHIBA WARDS YAMAHA ZENITH THREE DIGIT SETUP NUMBERS 342 032 195 219 177 292 129 130 132 261 294 295 333 334 196 249 250 251 063 119 014 033 039 044 045 050 069 159 168 116 035 078 198 480 029 14
DVD (continued) - DVD Players BRAND KLH KRELL LEXICON LG MAGNAVOX MARANTZ MERIDIAN MITSUBISHI MYRYAD NAD NAKAMICHI ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG SANSUI SANYO SHARP SONY SYLVANIA SYMPHONIC TATUNG THOMPSON TOSHIBA VENTURER YAMAHA ZENITH THREE DIGIT SETUP NUMBERS 135 104 148 091 057 074 066 096 083 095 153 017 102 134 088 103 076 035 180 021 042 138 139 144 150 066 083 095 105 166 023 092 099 107 108 131 086 026 027 026 027 056 070 119 165 170 137 159 154 147 094 033 118 145 126
DVD-DVD/VCR Combos BRAND GO VIDEO PANASONIC PHILIPS SAMSUNG SANSUI SONY TOSHIBA ZENITH THREE DIGIT SETUP NUMBERS 137 150 105 (VCR Functions for VCR 067) 137 159 154 145 191 141 091 (VCR Functions for VCR171) DVD-DVD Recorders BRAND PANASONIC SONY TOSHIBA THREE DIGIT SETUP NUMBERS 139 191 188 DVD-Laser Disc players BRAND DENON FUNAI KENWOOD MAGNAVOX MARANTZ MITSUBISHI NAD OPTIMUS PANASONIC PHILIPS PIONEER RADIO SHACK RCA REALISTIC RUNCO SANYO SHARP SONY TECHNICS THETA DIGITAL TOSHIBA YAMAHA THREE DIGIT
VCR (continued) - VCRs BRAND THREE DIGIT SETUP NUMBERS AMPRO ANAM AUDIO DYNAMICS BROOKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON 072 031 012 023 039 043 035 037 129 028 031 108 003 040 135 031 041 111 116 117 119 005 007 010 065 108 110 112 108 012 023 039 043 034 053 059 006 029 035 017 025 027 031 034 036 037 046 101 129 131 138 153 162 116 FISHER 003 010 008 009 FUNAI 034 GE 031 072 147 063 107 109 144 GO VIDEO 132 136 155 040 115 GOLDSTAR 101 106 114 013
VCR (Continued) - VCRs BRAND QUASAR RADIO SHACK RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH THREE DIGIT SETUP NUMBERS 066 145 075 123 107 109 144 147 158 041 145 013 020 140 034 040 003 008 010 014 031 034 040 053 054 101 058 148 014 102 104 113 115 112 120 032 040 066 107 109 122 125
VCR (continued) - TV/VCR Combos BRAND RADIO SHACK RCA SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH THREE DIGIT SETUP NUMBERS 123 034 101 057 154 067 034 034 034 CABLE - Cable Set Top Boxes BRAND ABC ADELPHIA ADVANCED NEWHOUSE ALTRIO AMERICAST ARCHER ARMSTONG AT&T BROADBAND ATLANTIC BROADBAND BELL SOUTH BLUE RIDGE BRESNAN BRIGHT HOUSE BUCKEYE COMM CABLEVISION CENTURION CENTURY CHARTER CITIZEN COGECO COMBANO COMCAST COMSAT COX DIGITAL DIGICABLE EAGLE EASTERN ECHOSTAR ELECTRICORD GEMINI GENERAL ELECTRIC GENER
CABLE (continued) - Cable Set Top Boxes BRAND MEDICOM MEMOREX MITSUBISHI MOTOROLA MOVIE TIME MOXI NCTC NSC OAK PACE PANASONIC PARAGON PHILIPS PIONEER PRUCER PULSAR RCA RCN RECOTON REGAL REGENCY RODGERS SAMSUNG SCIENTIFIC ATLANTA SEREN SERVICE ELECTRIC SHAW SIGECOM SONY SPRUCER STARCOM STARGATE SUSQUEHANNA TIME WARNER TOCOM TOSHIBA UNITED CABLE UNIVERSAL VIDEOTRON VIEWSTAR WIDE OPEN WEST ZENITH THREE DIGIT SETUP NUMBERS 074 052 102 074 110 109 028 032 111 074 015 028 038 071 031 037 053 043 074 044 047 052
CD (continued) - CD Changers and Players BRAND AUDIO EASE AUDIO TECHNICA BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER CASIO CLARINETTE CREEK CROWN DENON EMERSON FISHER FRABA GENEXXA GOLDSTAR HAITAI HARMAN KARDON HITACHI INKEL JCPENNEY JENSEN JVC KENWOOD KOSS KRELL KYOCERA LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX MISSION MITSUBISHI MITSUMI MODULAIRE MONDIAL MYRYAD NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED PROTON QUASAR THREE DIGIT SETUP NUMBERS 165
CD (continued) - CD Changers and Players BRAND RADIO SHACK RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP SHERWOOD SIGNATURE SONY SOUNDESIGN SUMO SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC TECHNICS TECHWOOD THETA DIGITAL TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX THREE DIGIT SETUP NUMBERS 182 017 042 150 042 050 051 102 181 182 187 044 107 161 178 250 044 107 044 069 107 128 171 190 125 050 069 102 026 031 051 066 003 019 051 096 112 115 119 166 033 048 081 097 126 133 177 225 226 164 251 155 044 107 0
SAT (continued) - Satellite Receivers and DSS BRAND THREE DIGIT SETUP NUMBERS GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MAGNAVOX MEMOREX MITSUBISHI MOTOROLA NEXT LEVEL PANASONIC PANSAT PAYSAT PHILIPS PROSCAN RADIOSHACK RCA SAMSUNG SKY SONY STAR CHOICE TOSHIBA UNIDEN ZENITH 148 122 139 140 122 161 162 068 154 165 166 108 117 122 170 136 136 068 154 148 148 142 160 172 136 152 153 156 068 154 136 108 117 151 106 150 148 151 106 150 123 155 163 169 175 164 103 148 127 068 154 157 158 136 159 AUX - C
AUX (continued) - Custom Installation Products BRAND MAKITA MINDPATH NILES NSM PIANO DISC PLUS POLKAUDIO RUSSOUND SCIENTIFIC ATLANTA SIMA SOLO ELECTRONICS SOMFY SONY STARCOM TURBOSCAN VELODYNE XANTECH THREE DIGIT SETUP NUMBERS 186 201 205 160 187 161 085 162 081 163 156 082 207 078 079 164 165 166 261 262 153 167 203 168 169 170 171 172 188 189 LIGHT - Lighting Systems and Remote Dimmers BRAND LITE-TOUCH LUTRON X-10 THREE DIGIT SETUP NUMBERS 208 212 158 159 077 183 093 TAPE - Tape Decks BRAND AIWA CARVE
TAPE (continued) - Tape Decks BRAND SHARP SHERWOOD SONY TEAC TECHNICS TOSHIBA VICTOR YAMAHA THREE DIGIT SETUP NUMBERS 026 057 131 175 181 038 004 028 030 033 034 020 022 052 084 089 009 059 212 007 010 076 088 109 122 193 112 106 021 026 031 067 040 PHONO - Turntables and Record Players BRAND JVC KENWOOD PIONEER YAMAHA THREE DIGIT SETUP NUMBERS 004 005 003 001 002 49
The Customizer Frequently Asked Questions What is a “macro” button? It is a Customizer button you set to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control).
URC-300 Warranty The URC-300 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: - Damage from misuse, neglect, or acts of nature. - Products that have been modified or incorporated into other products.
The A M uE tMo O mator 52
The A M uE tMo O mator 53
OCE-0025A Rev.