Specifications

24
UNDER CAB ACCESS DOOR
The cab shall include an access door in the left crew step riser constructed of DA finish aluminum with a
push and turn latch. The under cab access door shall provide access to the diesel exhaust fluid fill.
INTERIOR DOOR TRIM
The interior trim on the doors of the cab shall consist of an aluminum panel constructed of Marine Grade
5052-H32 0.13 of an inch thick aluminum plate. The door panels shall include a painted finish.
DOOR TRIM KICKPLATE
The inner door panels shall include an aluminum tread kick plate which shall be fastened to the lower
portion of the door panels.
CAB DOOR TRIM REFLECTIVE
The interior of each door shall include high visibility reflective tape. A white reflective tape 1.00 inch in
width shall be provided vertically along the rear outer edge of the door. The lowest portion of each door
skin shall include a reflective tape chevron with red and white stripes. The chevron tape shall measure
6.00 inches in height.
INTERIOR TRIM VINYL COLOR
The cab interior vinyl trim surfaces shall be gray in color.
CAB PAINT INTERIOR DOOR TRIM
The inner door panel surfaces shall be painted with Zolatone #20-72 silver gray texture finish or
equivalent.
HEADER TRIM INTERIOR PAINT
The metal surfaces in the header area shall be coated with Zolatone #20-72 silver gray texture finish or
equivalent.
TRIM CENTER DASH INTERIOR PAINT
The entire center dash shall be coated with Zolatone #20-72 silver gray texture finish or equivalent. Any
accessory pods attached to the dash shall also be painted this color.
TRIM LH DASH INTERIOR PAINT
The left hand dash shall be painted with a Zolatone #20-72 silver gray texture finish or equivalent.
TRIM RIGHT HAND DASH INTERIOR PAINT
The right hand dash shall be painted with Zolatone #20-72 silver gray texture finish or equivalent.