Specifications

25
INTERIOR TRIM SUNVISOR
The header shall include two (2) sun visors, one each side forward of the driver and officer seating
positions above the windshield. Each sun visor shall be covered with padded vinyl trim.
SWITCHES CENTER PANEL
The center dash panel shall include eighteen (18) rocker switch positions in a twelve (12) over six (6)
configuration in the left portion of the panel.
SWITCHES LEFT PANEL
The left dash panel shall include eight (8) switches. There shall be six (6) switches across the top of the
panel and two (2) staggered on the left hand portion of the panel. Five (5) of the top row of switches shall
be rocker type and the left one (1) shall be the headlight switch. The remaining switches shall consist of
one (1) windshield wiper/washer control switch and one (1) instrument lamp dimmer switch.
SEAT BELT WARNING
A Class One seat belt warning system, integrated with the Vehicle Data Recorder system, shall be
installed for each seat within the cab. The system shall activate an indicator light in the instrument panel,
a digital seat position indicator with a seat position legend in the switch panel, and an audible alarm.
SEAT MATERIAL
The seats shall include a covering of high strength, wear resistant fabric made of durable ballistic
polyester. A PVC coating shall be bonded to the back side of the material to help protect the seats from
UV rays and from being saturated or contaminated by fluids. Common trade names for this material are
Imperial 1200 and Durawear.
SEAT COLOR
All seats supplied with the chassis shall be gray in color. All seats shall include red seat belts.
SEAT DRIVER
The driver's seat shall be an H.O. Bostrom Sierra model seat with air suspension. The four-way seat shall
feature 3.00 inch vertical travel air suspension and manual fore and aft adjustment with 5.00 inches of
travel. The suspension control shall be located on the seat below the left front corner of the bottom
cushion. The seat shall also feature integral springs to isolate shock.
The seat position shall include a three-point shoulder harness with lap belt and an automatic retractor
attached to the cab. The buckle portion of the seat belt shall be mounted on a semi-rigid stalk extending
from the seat base within easy reach of the occupant.
SEAT BACK DRIVER
The driver’s seat shall feature a two (2) way adjustable lumbar support and offer an infinite fully reclining
adjustable titling seat back. The seat back shall also feature a contoured head rest.