Specifications

flow and help prevent moisture build up. The batteries shall be held in place by non-conducting phenolic

resin hold down boards.

BATTERY BOX COVER

Each battery box shall include a steel cover which protects the top of the batteries. Each cover shall

include flush latches which shall keep the cover secure as well as a black powder coated handle for

convenience when opening.

BATTERY JUMPER STUD

The starting system shall include battery jumper studs. These studs shall be located in the forward most

portion of the driver's side lower step. The studs shall allow the vehicle to be jump started, charged, or the

cab to be raised in an emergency in the event of battery failure.

ALTERNATOR

The charging system shall include a 320 amp Leece-Neville 12 volt alternator. The alternator shall

include a self-exciting integral regulator.

BATTERY CONDITIONER

A Kussmaul 1200 Pump Plus battery conditioner shall be supplied. The battery conditioner shall be

mounted in the cab behind the driver's seat.

BATTERY CONDITIONER DISPLAY

A Kussmaul battery conditioner display shall be supplied. The battery conditioner display shall be

mounted in the cab, viewable through the cab mid side window behind the left front door.

AUXILIARY AIR COMPRESSOR

A Kussmaul Pump 12V air compressor shall be supplied. The air compressor shall be installed behind the

driver's seat. The air compressor shall be plumbed to the air brake system to maintain air pressure.

ELECTRICAL INLET

A Kussmaul 20 amp super auto-eject electrical receptacle shall be supplied. It shall automatically eject

the plug when the starter button is depressed. The electrical inlet shall be yellow in color and installed on

the left hand side of the cab ahead of the front door.

HEADLIGHTS

The cab front shall include four (4) rectangular halogen headlamps with separate high and low beams

mounted in bright chrome bezels.

FRONT TURN SIGNALS

The front fascia shall include two (2) Whelen model 600 4.00 inch X 6.00 inch halogen amber arrow

shaped turn signals which shall be installed outboard of the warning lights. The turn signal light heads

shall be mounted in chrome plastic bezels and shall be located above the headlamps.