Specifications
30
SIDE TURN/MARKER LIGHTS
The sides of the cab shall include two (2) LED round side marker lights which shall be provided just
behind the front cab radius corners.
MARKER AND ICC LIGHTS
In accordance with FMVSS, there shall be five (5) LED cab marker lamps designating identification,
center and clearance provided. These lights shall be installed on the face of the cab within full view of
other vehicles from ground level.
HEADLIGHT AND MARKER LIGHT ACTIVATION
The headlights and marker lights shall be controlled through a rocker switch within easy reach of the
driver. There shall be a dimmer switch within easy reach of the driver to adjust the brightness of the dash
lights. The headlamps shall be equipped with the "Daytime Running" light feature, which shall illuminate
the headlights to 80% brilliance when the battery master switch is in the "On" position and the parking
brake is released.
GROUND LIGHTS
Each door shall include an LED NFPA compliant ground light mounted to the underside of the cab step
below each door. The ground lighting shall be activated by the opening of the respective door as well as
being activated when the parking brake is set.
STEP LIGHTS
The middle step located at each door shall include a 4.00 inch round light which shall activate with the
opening of the respective door.
ENGINE COMPARTMENT LIGHT
There shall be an incandescent NFPA compliant light mounted under the engine tunnel for area work
lighting on the engine. The light shall include a polycarbonate lens, a housing which is vibration welded
and a bulb which shall be shock mounted for extended life. The light shall activate automatically when
the cab is tilted.
FRONT SCENE LIGHTS
The front of the cab shall include one (1) Fire Research Optimum model OPA800-H15 contour roof
mount scene light installed in the center on the brow of the cab.
The lamp head shall have one (1) High Intensity Discharge (HID) 12 volt 150 watt bulb. The lamp head
and brackets shall be powder coated white.
FRONT SCENE LIGHTS ACTIVATION
The front scene lighting shall be activated by a rocker switch located on the main switch panel.










