Specifications

31
INTERIOR OVERHEAD LIGHTS
The cab shall include a two-section dome lamp with a red and clear lens located over each door. The
dome lamps shall be rectangular in shape and shall measure approximately 9.50 inches in length X 5.00
inches in width with a black colored bezel. The clear portion of each lamp shall be activated by opening
the respective door and both the red and clear portions can be activated by individual switches on each
lamp.
An additional incandescent three (3) light module with dual map lights shall be located over the engine
tunnel which can be activated by individual switches on the lamp.
AUXILIARY DOME LIGHT MID CREW
The cab shall include two (2) 7.00 inch auxiliary dome lights on the headliner in the middle of the crew
area near the center. One (1) light shall include a clear lens and one (1) light shall include a red lens. The
clear light shall be on the right and the red light shall be on the left. The clear light shall be activated by
the rear doors as well as an individual switch located on the side of the light. The red light shall be
activated with a switch on the light only.
DO NOT MOVE APPARATUS LIGHT
The front headliner of the cab shall include a flashing red light clearly labeled "Do Not Move Apparatus".
In addition to the flashing red light, an audible alarm shall be included which shall sound while the light
is activated.
The light and alarm shall be interlocked for activation when either a cab door is not firmly closed or an
apparatus compartment door is not closed, and the parking brake is released.
MASTER WARNING SWITCH
A master switch shall be included in the main rocker switch panel. The switch shall be a rocker type, red
in color and labeled “Master” for identification. The switch shall feature control over all devices wired
through it. Any warning device switch left in the “ON” position shall automatically power up when the
master switch is activated.
HEADLIGHT FLASHER
An alternating high beam headlight flashing system shall be installed into the high beam headlight circuit
which shall allow the high beams to flash alternately from left to right.
The flashing headlights shall be activated through a rocker switch on the switch panel. The rocker switch
shall be clearly labeled for identification.
INBOARD FRONT WARNING LIGHTS
The cab front fascia shall include two (2) red Whelen 600 series Super LED front warning lights in the
left and right inboard positions. The lights shall be mounted to the front fascia of the cab within a chrome
bezel.
The front warning lights shall be controlled via rocker switch on the panel. This switch shall be clearly
labeled for identification.