Specifications

The manual shall be specifically written for the body model being purchased. It shall not be a generic

manual for a multitude of different bodies.

MANUALS, CERTIFICATIONS, AND DIAGRAMS

At the time of delivery, one (1) hard copy(ies) of: each of the following manuals will be provided.

1. Engine manufacturer's certified brake horsepower curve showing the maximum no-load governed

speed.

2. Manufacturer's record of pumper construction details, per NFPA 1901.

3. Manufacturer's Run-In Certification with preliminary test results.

4. Pump Manufacturer's Certification of Hydrostatic Tests.

5. Pump Manufacturer's Certification of Pump Test Results.

6. The Certification of Inspection/Test of Fire Department Pumper by an Independent Third Party per

NFPA 1901 standards.

7. Weight documents shall be supplied with the completed vehicle to determine compliance with NFPA

section 10-1. Weights shall be for each tire or dual set of tires, so as to verify side-to-side loading, to be in

compliance with NFPA section 4.12.2.3.3.

8. The complete operation and maintenance manual covering the completed apparatus as delivered

including the pump, emergency lighting and siren, generator, or other furnished accessories.

9. A finalized drawing of apparatus as completed.

10. A "Delivery Manual", consisting of a 3-ring notebook type binder with reference tabs for each

section, shall be furnished to include the following items: invoice copy(ies), proof of insurance,

Manufacturer's Statement of Origin, acceptance forms, certifications, specifications, individual

component manufacturer instructions and parts manuals, warranty forms for body, warranty forms for all

major components, warranty instructions and format to be used for compliance with warranty obligations,

routine service forms/publications, technical publications or training guide for major components, and

apparatus body print "as built".

11. Paint numbers of all color coatings.

12. Certifications of water tank capacity.

13. Written load analysis of 12-volt electrical system as installed by body builder.

A test data plate shall be provided at the pump operator's position which gives the rated discharges and

pressures together with the speed of the engine as is determined by the manufacturer's test for this

particular unit. Plate shall also include delivery date, pump serial number(s), original Customer, and the

apparatus manufacturer's serial number.

FIRE PUMP SYSTEM

Due to the multiple building styles and layouts of a rescue pumper the Fargo Fire Department is letting

the builder configure the pump location where they feel it is in the best location. The Fargo Fire

Department will accept either a mid mount or a rear mount location for the pump, with the rear mount

being preferred. No matter what design is submitted the builder must supply the Fargo Fire Department

with ten (10) locations and contacts where the design is being used in a climate similar to Fargo in order

to insure there will be no problems with the pump in the future.