Specifications

58
horizontal and vertical gusset plates. Steel mounting flanges shall be transversely reinforced with bolted
(removable) heavy wall steel tube cross-support structures.
Hitch receiver mountings shall allow for a minimum 1500 lb capacity vertical lift, and 5000 lb capacity
horizontal pull.
ELECTRIC WINCH RECEPTACLES
A 12-volt winch power receptacle shall be furnished at each of the side receivers, complete with insulated
2-Gauge battery cable wired to the vehicle’s starter/power post.
WINCH RECEIVER LOAD RATING LABEL
A permanently engraved label is to be provided, adjacent to the receiver, with Load Rating information,
for maximum pull-rating and maximum lift rating, OF THE RECEIVER.
FRONT BUMPER WINCH RECEIVER
A Class-3 tubular hitch receiver assembly shall be furnished, located centerline underside of the front
bumper. The receiver shall be "straight-line" pull rated for up to 9000 lb. with a vertical lift capacity of
2000-lb. Receiver location and design shall allow for quick installation of a portable C-III hitch mounted
12-volt powered winch.
ELECTRIC WINCH RECEPTACLE
The front receiver position shall be provided with a heavy duty 12-volt quick disconnect flat style (winch
matching) power receptacle. Receptacle to be furnished with snap-on vinyl protective cover, and loom
encased insulated multi-stranded copper battery cable which is wired directly to chassis batteries.
REAR TAILBOARD WINCH RECEIVER
A Class-3 tubular hitch receiver assembly shall be furnished, located centerline underside of the rear
tailboard/platform. The tubular apparatus body sub frame shall be designed and reinforced to provide
support for the winch receiver. The receiver shall be "straight-line" pull rated for up to 9000 lb. with a
vertical lift capacity of 2000-lb. Receiver location and design shall allow for quick installation of a
portable C-III hitch mounted 12-volt powered winch. Hitch shall be provided with loops, on each side,
for trailer tongue safety chain.
ELECTRIC WINCH RECEPTACLE
The rear receiver position shall be provided with a heavy duty 12-volt quick disconnect flat style (winch
matching) power receptacle. Receptacle to be furnished with snap-on vinyl protective cover, and loom
encased insulated multi-stranded copper battery cable which is wired directly to chassis batteries.
TRAILER BRAKE AND LIGHTING RECEPTACLE
A weatherproof trailer connector shall be furnished, wired to vehicle's brake-stop, tail, and turn circuits.