Specifications

66
2. Five (5) control valves shall be furnished, one (1) for each of the four (4) 6000 PSI air banks, and one
(1) for SCBA bottle fill.
3. One (1), adjustable pressure regulator shall be furnished 6000 PSI in/50-6000 PSI out.
4. One (1), Pioneer 3000 male connector with bleed valve and mating female connector shall be
furnished on face of panel, with dust cap, for refilling cascade cylinders.
LOCATION(S) CASCADE FILL PANEL
Above specified cascade fill panel shall be located in the rear compartment on the passenger’s side of the
apparatus.
AIR STORAGE BOTTLE LOCATONS
The four (4) specified air storage bottles shall be installed in void area of rear body corners. Bottles shall
be installed standing vertically, rigidly restrained within heavy steel base and collar brackets, and
accessible by removable rear compartment bulkhead.
Apparatus body shall be sufficiently reinforced to accommodate load of bottles.
SPACE SAVER CONTAINMENT SYSTEM - 2 BOTTLES
A dual bottle containment system shall be furnished, manufactured by Resolve Specialty Products, LLC.
Fill enclosure shall be designed for mobile applications and incorporated into the fire apparatus body. Fill
station shall be totally enclosed and constructed of .1875" steel plate, designed to contain SCBA cylinder
in the event of rupture.
Fill station shall be installed in a manner that allows air to exhaust through bottom of enclosure.
The loading position from the compartment floor to the bottle connector shall be 14.25” in the lower
holder and 22.60” in the upper holder. The maximum length of SCBA bottle with the valve and fill
adapter shall be 29 inches in the lower holder and 27 inches in the upper holder. The fill station door shall
be constructed of .25” stainless steel.
Each fill position shall be lined with a plastic material to protect each SCBA or SCUBA cylinder from
abrasion.
To ensure operator protection, automatic safety interlocks that prevent SCBA or SCUBA cylinder filling
until the door is completely closed shall be provided and located within the enclosure.
A bottom rubber seal shall be provided to seal out road dirt.
LOCATIONS OF CONTAINMENT SYSTEMS
Above specified dual (2) bottle containment systems shall be located in the rear compartment on the
passenger’s side of the apparatus.