Specifications

67
TRAFFIC VESTS
Six (6), traffic vest(s) to be furnished, one for each seating position. Vest(s) to comply with ANSI/ISEA
207 and have a five-point breadaway feature that includes two at the shoulders, two at the sides, and one
at the front.
ILLUMINATED WARNING DEVICES
Five (5) illuminated warning devices such as highway flares to be furnished with unit.
FOLDING TRAFFIC CONES
One (1) Set of five (5) 28 inch spring loaded traffic cones with storage tote shall be provided and mounted
in a customer approved location.
DEFIBRILLATOR
One (1) each lifepack 1000 Defibrillator shall be provided and mounted in passenger area.
ELECTRICAL - 12 VOLT
System shall be 12 volt, negative ground.
WIRING HARNESSES
All apparatus body and pump compartment wiring for specified lights and electrical equipment shall be
suitably protected inside heat resistant vinyl, forming multiple harnesses. Multiple harnesses to run from
chassis cab, pump compartment, and apparatus body to a PDC (power distribution center). Harnesses
shall consist of individual legend imprinted multi-stranded copper color coded SAE-J 1128 compliant
automotive wires inside vinyl loom. Spare wires shall run throughout apparatus compartmented body and
pump compartment, so as to allow future installations of electrical accessories, using original harnesses.
All wiring to be identified and imprinted with number and function. Auto-reset circuit breakers to be
furnished, of various amperage capacity, sized for intended load.
All 12-volt switches, relays, terminals, connectors, and wiring to have a direct current rating of 125% of
maximum current for which the current is protected. All wiring terminals to be machine crimped, pull-
tested during assembly.
APPARATUS LIGHTING INSTALLATION STANDARDS:
All specified 12-volt to be in accordance with D.O.T. regulations at time of purchase.
WALKWAY, STANDING PLATFORM, AND WORK AREA LIGHTING
Specified standing, stepping, and walking surface lighting shall be located to minimize accidental
breakage.