Specifications

70
TRAFFIC EXEMPTION:
One (1) 3M Opticom Emitter shall be furnished, installed inside the light bar, center position.
TRAFFIC DIRECTING LIGHT BAR - REAR OF BODY
One (1), Whelen model TAL65 Traffic Directing 36" wide light bar with six (6) Amber LED lamps and
one (1) TACTRL1 control head is to be furnished. The light bar is to be surface mounted at center rear of
body, as high as possible. Control head is to be installed inside driver's compartment, location as
designated by Customer at pre build conference.
REAR BODY TRAFFIC DIRECTING LIGHTBAR GUARD
A fabricated stainless steel angular guard is to be provided at the rear of body, full width of and same
depth as the traffic directing light bar. The specified rear body mounted traffic light bar is to be surface
mounted to the rear face of body, beneath the fabricated guard so as to protect the light bar and lenses.
SIDE LOWER ZONE, REAR WHEEL WELL, LED
Four (4), Whelen 60R02FRR surface mount Red Super LED flashing lights with chrome trim flanges to
be furnished, two (2) on each side of the apparatus in the front and rear portions of the rear wheel wells.
Lights are to meet the NFPA Zone B & D lower level lighting requirement. Lights to be activated by an
illuminated rocker switch.
REAR OF BODY LOWER LEVEL LED WARNING LIGHTS
Two (2), Whelen model 60R02FRR, 6" x 4" rectangular surface mounted LED light heads and two (2)
6EFLANGE chrome plated surrounds to be furnished, located one (1) driver's side lower rear body
corner, one (1) passenger's side lower rear body corner. Light lenses to be driver's side Red, passenger's
side Red. Lights to be activated by specified switch, identified by function.
REAR SIDE AND REAR UPPER LEVEL LED "STACKED" LIGHTS
Two (2), Whelen model 60R02FRR, 6" x 4" rectangular surface mounted LED light heads and two (2)
6EFLANGE chrome plated surrounds to be furnished and mounted two (2) rear upper sides (1-each side).
Light lenses to be driver's side Red, passenger's side Red.
Four (4), Whelen 500 series TIR6 Super LED rectangular surface mounted light heads to be furnished
two (2) driver's side rear and two (2) passenger's side rear "stacked" one above the other. Light lenses to
be driver's side Red, passenger's side Red.
All six (6) lights to be activated by specified switch, identified by function.
PAINT COLOR
Finish top coat paint color shall be of a single "job color" to match major chassis cab exterior color. The
body shall match existing Fargo Fire Department apparatus,
Unless otherwise specified, the chassis frame, axles, and suspension shall remain the OEM color of
Black.