Specifications

75
Junction box holder(s) shall be furnished, located adjacent to reel roller assembly, or as customer
designated.
CORD REEL LOCATION: FLOOR LEVEL BACK OF DRIVER COMPARTMENT(S)
One (1) of the specified electric cord reel(s) shall be enclosed inside the driver side compartment(s).
Electric cord shall "deploy" straight outboard away from the apparatus.
CORD REEL LOCATION: FLOOR LEVEL OF PASSENGER COMPARTMENT(S)
One (1) of the specified electric cord reel(s) shall be enclosed inside the passenger side compartment(s).
Electric cord shall "deploy" straight outboard away from the apparatus.
AIR REEL
One (1) Hannay air hose reel or equivalent with 12-volt electric chain and sprocket rewind shall be
furnished, painted with oven-cured enamel standard silver metallic color. Air reel shall be equipped with
a placarded weatherproof push-button 12-volt rewind switch located within easy reach of the operator
while standing on the ground outside the vehicle. The air hose reel shall be plumbed to the apparatus air
system and be able to be deployed on the passenger side of the apparatus.
The reel shall be provided with a single 150 ft. section of air line with female connection on the end.
HOSE ROLLERS
The air hose reel shall be equipped with a "captive" 4-way cord roller assembly, angled towards the
ground level, for ease of cord deployment and rewinding. The roller assembly shall be of same or slightly
narrower width as reel drum, in order to prevent hose from crawling over the reel discs while being
deployed and rewound.
125-VOLT 5-20R LINE VOLTAGE RECEPTACLES
Five (5), duplex 5-20R (household), 125-volt, 20-amp, 3-wire plug-in receptacle(s), to be furnished.
Receptacle(s) are to be recessed into a single gang outlet box and surface mounted to specified location,
provided with an appropriate exterior gasket and hinged cap or stainless steel duplex cover plate.
BODY LINE VOLTAGE RECEPTACLE LOCATION(S)
The above specified Body Line Voltage Receptacles shall be located: one (1) each front and rear, driver's
and passenger's side body corners and one (1) in the front bumper extension.
LIGHT TOWER
A Command Light Knight 2, part number KL475, light tower shall be provided for installation on the
apparatus. The location of the light tower and its controls shall be installed according to instructions
given by the customer and the requirements of the light tower manufacturer.