Specifications

76
LOCATION: LIGHT TOWER AND CONTROLS
Above specified light tower shall be mounted on the forward portion of the body on top of the truck, and
the controls for this tower shall be mounted in the compartment with the SCBA fill station.
12 VOLT WINCH
The apparatus manufacture shall supply a 12volt winch with the apparatus. The winch shall be wired to
comply with NFPA 1901 and be mounted on a base to allow it to be inserted and operated in the 4 winch
receiver positions. The winch shall be as large as possible for the load limits of the apparatus.
FINAL DELIVERY AND DEMONSTRATION
Final delivery of the completed vehicle shall be made via drive-away F.O.B. Fire Department
Headquarters, at which time purchaser’s designated Fire Department and/or community personnel shall
be instructed as to the proper use and maintenance of the apparatus by the Manufacturer’s Factory
Representative. Apparatus demonstration shall include fire pump operational instructions, along with
additional instructions as to proper operation and maintenance of supporting systems which have been
provided and installed by the manufacturer.
EQUIPMENT OPTIONS
Due to the possible price breaks on equipment the Fargo Fire Department would like each option of
equipment priced out separately. All or none of the equipment options may be purchased with the
apparatus. These options do not include the equipment that was specified in the apparatus RFP.