SDS

ManualsBrandsCutting Edge ManualsIce Melt50 lb. Screened Pro Powermelt + with Corrosion Inhibitor Anti-caking Agent and Color Indicator Pallet (49-Bags)

Page: 1/8

Safety Data Sheet

according to OSHA HCS (29CFR 1910.1200)

and WHMIS 2015 Regulations

Revision: February 25, 2020

50.1.3

1 Identification

Product identifier

Trade name: Cutting Edge® Pro PowerMelt+

Product code:

No other identifiers

Recommended use and restriction on use

Recommended use:

Ice melting.

Restrictions on use:

No relevant information available.

Details of the supplier of the Safety Data Sheet

Manufacturer/Supplier:

Blank Industries, LLC

17 Brent Drive

Hudson, MA 01749

855-887-3123

www.blankind.com

Emergency telephone number:

855-887-3123

2 Hazard(s) identification

Classification of the substance or mixture

Eye Irrit. 2A H319 Causes serious eye irritation.

Label elements

GHS label elements

The pr oduct is classified and labeled according to the Globally Harmonized System (GHS).

Hazard pictograms:

GHS07

Signal word:

Warning

Hazard statements:

H319 Causes serious eye irritation.

Precautionary statements:

P264 Wash thoroughly after handling.

P280 Wear eye protection.

P305+P351+P338 IF IN EYES: Rinse c autiously with water for several minutes . Rem ove contact lenses, if

present and easy to do. Continue rinsing.

P337+P313 If eye irritation persists: Get medical advice/attention.

Other hazards

There are no other hazards not otherwise classified that have been identified.

3 Composition/information on ingredients

Chemical characterization: Mixtures

Components:

7647-14-5 Sodium chloride >90%

10043-52-4 calcium chloride <5%

(Cont'd. on page 2)

Summary of content (8 pages)

PAGE 1
50.1.3 Page: 1/8 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Revision: February 25, 2020 1 Identification · Product identifier · Trade name: Cutting Edge® Pro PowerMelt+ · Product code: No other identifiers · Recommended use and restriction on use · Recommended use: Ice melting. · Restrictions on use: No relevant information available.
PAGE 2
50.1.3 Page: 2/8 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 1) Eye Irrit. 2A, H319 7447-40-7 Potassium chloride Eye Irrit. 2B, H320 13601-19-9 Tetrasodium hexacyanoferrate 124-68-5 2-amino-2-methylpropanol Skin Irrit. 2, H315; Eye Irrit. 2A, H319 Green Liquid Color · Additional information: For the wording of the listed Hazard Statements, refer to section 16. <5% <0.5% <0.
PAGE 3
50.1.3 Page: 3/8 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 2) · Environmental precautions Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. · Methods and material for containment and cleaning up Vacuum or sweep and collect in a suitable container.
PAGE 4
50.1.3 Page: 4/8 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ · Protection of hands: Gloves are advised for repeated or prolonged contact. · Material of gloves Nitrile rubber, NBR Butyl rubber, BR Neoprene gloves Natural rubber, NR Sensibilization by the components in the glove materials is possible. · Eye protection: (Cont'd.
PAGE 5
0.1.3 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Page: 5/8 Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 4) · Solubility in / Miscibility with Water: Soluble. · Partition coefficient (n-octanol/water): Not determined. · Viscosity Dynamic: Kinematic: · Other information Not applicable. Not applicable. No relevant information available. 10 Stability and reactivity · Reactivity: No relevant information available.
PAGE 6
50.1.3 Page: 6/8 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 5) None of the ingredients are listed. · Probable route(s) of exposure: Ingestion. Inhalation. Eye contact. Skin contact. · Acute effects (acute toxicity, irritation and corrosivity): Causes serious eye irritation. Mechanical irritation to eyes and skin. · Repeated dose toxicity: No relevant information available.
PAGE 7
50.1.3 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Page: 7/8 Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 6) · Transport hazard class(es) · DOT, ADR/RID/ADN, IMDG, IATA · Class Not regulated. · Packing group · DOT, ADR/RID/ADN, IMDG, IATA Not regulated. · Environmental hazards Not applicable. · Special precautions for user Not applicable.
PAGE 8
50.1.3 Safety Data Sheet according to OSHA HCS (29CFR 1910.1200) and WHMIS 2015 Regulations Page: 8/8 Revision: February 25, 2020 Trade name: Cutting Edge® Pro PowerMelt+ (Cont'd. of page 7) 16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.