Instruction Manual

Typical Applications
ULTRANIK HF motion detector
A
Daylight Harvest
The motion detector can turn on the light based on movement. With this detector built in,
light is automatically on when needed and dimmed to preset level before it is totally off.
The light keeps off during daytime even when
movement is detected. (Ambient lux level is
above preset daylight threshold)
With movement and insufficien tambient lux level,
the light is triggered on 100% by the detector.
The light turns off automatically
after stand-by time.
If there is no more movement, the light dims to
stand-by dimming level after hold-time.
The sensor highbay turns on at full or dims to maintain the lux level.
The light output regulates according to level of natural light available
......
1
2
43
SECTION 1 TYPICAL APPLICATIONS
2
Detection Pattern
3
6
9
12
15
1 2 3 41235 47 6
2
2 4 64
6
8
8
2 4 6 8 10 12 14 16 18 20
8
5 76 8
height (m)
height (m)
high sensitivity area low sensitivity area high sensitivity area low sensitivity area
Ceiling mounting (m) Wall mounting (m)