manual

5
Speaker Connection
You can connect these speakers to a variety of devices, such as laptop, computer, smartphone, iPod, MP3 player.
• Take the grey plug from the back of right speaker and plug this into the “To Speaker” jack on the back of subwoofer.
• Take the AC power adapter cord and plug the black plug into the back of the right Satellite speaker.
• Take the AC power adapter and plug into wall socket or power strip.
Pairing with the speakers for the first time
Before you start, make sure the Bluetooth capability of your source device is turned on and ready to discover
new items. If needed, see your device’s instructions to add or setup a Bluetooth device.
When you first turn on the CA-3092BT speaker system, the Bluetooth functionality is not engaged. This is so
you can also use your CA-3092BT as a wire connected speaker system.
To wirelessly connect with the Bluetooth function of your speakers:
1. Power on the speakers by pressing the power button; blue LED will light up.
2. Press and hold the Bluetooth button for approximately 3 seconds, or until you hear an audible melody.
The blue LED will start blinking rapidly, letting you know it’s ready. At this point, the speaker will make
itself discoverable to any Bluetooth device within 30 feet.
3. With your audio source (smartphone, tablet, iPod, etc.), find the Bluetooth device list and look for “CA-3092BT.”
Tap it to pair/connect with the speakers.
4. When the device connects, you will hear a short audible beep, the LED will stop blinking and will return to
a solid “on” state.
5. Now you can go to your music applications; start play and enjoy your music.
Turning off your source device will automatically disconnect your speakers. If you plan on not using your speakers
again for several hours or more, we recommend you turn off your CA-3092BT speakers until you are ready
to listen again.
Pairing with the speakers after the first time
Once you’ve successfully paired your speakers, your device will automatically connect with it on successive
returns to the room in which they are situated. You will be able to immediately go the audio application of your
choice, select your audio tracks, and begin enjoying almost at once.
Powering off the speakers will disconnect from your source device automatically, and will also pause the audio
track you are listening to. Turning your speakers back on, while your device is still Bluetooth enabled, will allow
your device to reconnect within just a couple of seconds, without any further effort.
To Speaker
C
M
Y
CM
MY
CY
CMY
K
CA-3092BT_manu.pdf 6 13年4月30日 下午5:29