CA-5402 Owner’s Guide Powered Speaker System with Control Pod
Thank you! Merci! ¡Gracias! Getting Started Pour commencer Inicio Connect to audio out source Connecter à la prise de sortie audio Conectar a la fuente de audio Front Rear Center To Control Pod OUTPUT Center Front Left Rear Left Front Right Rear Right Power ON OFF Or connect to headphone jack Ou connecter à la prise casque O conectar a la toma de auriculares 1 Aux cable not Included Câble auxiliaire non fourni No se incluye cable auxiliar
WARNING: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and point where they exit from the product. 14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device.
Welcome. CA-5402 A Six-Piece Powered Speaker System Introduction This speaker system is designed to deliver superior audio performance to computers, smartphones, iPod®, MP3 players, DVD players, and other portable audio devices. The system offers high efficient, long excursion drivers combined with a low distortion, high powered amplifier that provides deep bass with clarity and a greater dynamic audio range.
Speaker Connection You can connect these speakers to a variety of devices, such as laptop, computer, smartphone, iPod, MP3 player, CD player, DVD player, and other audio devices. Please read the following instructions along with the diagrams provided to identify which diagram most closely matches your connection source. Note: It is very important to identify how many channels of sound your sound source puts out. This is a 5.1 digital ready speaker system. It can be used on 2 channel, 4.1 or 5.
Controls & Features • Power – The on/off switch is on the back of subwoofer. Press to turn the speaker on or off. • Mute Switch – The mute switch is on the wired remote. Slide to turn the speaker on or mute. • Master Volume Control – This control is on the wired remote and is indicated by the word “MAX” “MIN”. Rotate clockwise to turn volume up or counter-clockwise to turn volume down. • Bass Volume Control – This control is on the wired remote and is indicated by the word “Bass Vol”.
Troubleshooting Symptom: Speaker system will not power on. Solution: • Power button is not turned on. Press the power button back and forth and check for the blue LED indicator light to come on. • Verify the AC power cord is plugged into the wall outlet. • Check if the wall outlet or power strip you are using is actually getting power, i.e. not a switched outlet. Symptom: Speaker does not produce sound. Solution: • Verify the speaker is getting power. Check above steps.
Bienvenue. CA-5402 Système d'enceintes 6 enceintes à alimentation intégrée Introduction Ce système d'enceintes haute efficacité et à long déplacement est conçu pour apporter une haute performance audio aux ordinateurs, smartphones, iPod®, lecteurs MP3 et DVD et autres dispositif audio portables.
Connexion Des Enceintes Vous pouvez connecter ces enceintes à divers dispositifs tels qu'ordinateurs portables, ordinateurs de bureau, smartphones, iPods, lecteurs MP3, CD et DVD et autres dispositifs audio. Veuillez consulter les instructions suivantes et les schémas pour trouver le schéma qui ressemble le plus à votre installation. Remarque : Il est important de connaître le nombre de canaux audio dont dispose votre source audio. Ceci est un système d'enceintes 5.1 compatible numérique.
Commandes & Fonctionnalités • Marche/arrêt – L'interrupteur de marche/arrêt est situé au dos du caisson de basse. Appuyer dessus pour mettre le haut-parleur sous ou hors tension. • Commutateur de sourdine – Le commutateur de sourdine est situé sur la commande à distance câblée. Le coulisser pour allumer le haut-parleur ou le mettre en sourdine. • Commande principale du volume – Cette commande située sur la télécommande à filest marquée “MAX”“MIN”.
Dépistage des pannes Symptôme Le système d'enceintes ne s'allume pas. Solution : • L'interrupteur marche/arrêt est en position arrêt. Appuyez sur l'interrupteur et vérifiez le bon allumage du voyant LED bleu. • Vérifiez le branchement de l'adaptateur AC sur la prise secteur. • Vérifiez que la prise secteur ou le bloc prise est alimenté (prise non*commandée par un interrupteur). Symptôme : L'enceinte ne produit aucun son Solution : • Vérifiez l'alimentation de l'enceinte en suivant les étapes ci-avant.
Bienvenido. CA-5402 Sistema de Altavoz de seis piezas amplificado Introducción Este sistema de altavoz está diseñado para proporcionar un nivel de audio superior para ordenadores, smartphone, iPod®, reproductores de MP3, reproductores de DVD, y otros aparatos de audio portátiles.
Conexión De Los Altavoces: Puede contactar estos altavoces a una variedad de aparatos, tales como laptops, ordenadores, smartphones, iPod, reproductores MP3, reproductores de CD, reproductores de DVD, y otros aparatos audio. Por favor, lea las instrucciones siguientes junto con los diagramas que se proporcionan, para identificar qué diagrama se parece más a su fuente de alimentación. Nota: Es muy importante identificar cuántos canales de sonido tiene su fuente de sonido como salida.
Controles Y Funciones • Energía – El interruptor on/off está en la parte trasera del sub-bafle. Presionelo para conectar o desconectar el altavoz. • Botón Silenciador – El botón silenciador está en el control remoto. Deslícelo para activar o silenciar el altavoz. • Control de volumen maestro – Este control está en el remoto cableado y está indicado por las palabras “MAX” “MIN”. Hágalo girar en el sentido de las agujas del reloj para subir el volumen o en contra de las agujas del reloj para bajar el volumen.
Problemas Síntomas: El sistema de altavoz no se conecta. Solución: • El control de energía no está conectado. Presiónelo y compruebe si el indicador LED azul se enciende. • Verifique que el adaptador de energía CA está conectado en la toma de salida de la pared. • Compruebe si la toma de salida de la pared o la regleta que utiliza está recibiendo energía, i.e. no una toma de salida conectada. Symptom: Speaker does not produce sound. Solución: • Verifique que llega energía al altavoz.