User's Manual

Product Overview Choosing Your Source
Controls & Features
Aux in Connection
CA-3052BT
• Power – The on/off button is on the right satellite speaker. Rotate clockwise to turn on. Rotate counter-
clockwise to turn the system off.
• Master Volume Control – This control is on the right satellite speaker. Rotate clockwise to turn volume
up or counter - clockwise to turn volume down.
• Input selection button – Use this button to switch between your audio source (Bluetooth and Aux in)
• Auxiliary Input Connection—the auxiliary input jack allows the connection of a second audio source.
• LED
Blinking Blue – Device is under pairing mode
Blue – Bluetooth device connected for play back
Green – Audio playback through 3.5 mm input
• AUX
Volume control with power on/off switch
Input selection button
LED
Auxiliary input jack
Aux in Connection
- Power on the device by rotating the power knob
- Plug in 3.5mm AUX cable into the Aux jack on the back of speaker
- Press the input button once to switch audio source to aux in
- LED will change to green
Bluetooth Connection
Before you start, make sure the Bluetooth capability of your source device is turned on and ready to discover
new items. If needed, see your device’s instructions to add or setup a Bluetooth device.
- Power on the device by rotating the power knob
- Device will enter pairing mode directly
- Device entered into pairing mode, the blue LED will start blinking rapidly
- Device will automatically reconnect with last device if it is nearby and detected
- Select device name as “CA-3052BT” on your BT audio source
-
When the device connects, the LED will stop blinking and will return to a solid “on” state
- Now you can go to your music applications; start play and enjoy your music
- The speaker system will automatically reconnect with the last BT device it was paired to when in range