Contents 1. Introduction Bluetooth wireless technology 2. Get started Overview Chargers and batteries Switch the headset on or off Pair the headset with A compatible phone Disconnect the headset From the phone Reconnect the paired headset to your phone Troubleshooting 3. Basic use Call handing Adjust the earphone volume Switch the call between phone and headset 4. Battery information 5. Care and maintenance 1. Introduction Thank you for purchasing the BH13.
mobile phones and other Bluetooth embedded devices, The Bluetooth headset BH13 allows you freedom to make and receive calls while on the move or in the office ,You can connect the headset to a compatible phone that supports Bluetooth wireless technology. Please read the user manual to make the best use of this BH13 Headset and its many features. Bluetooth wireless technology Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables.
2. Get started ■Overview The headset contains the following parts as shown in the fingure: (1)Answer/end key. (2)Led Indicator (red/blue) (3)Volume up and volume down buttons (4)Microphone (5)Earphone (6)Charger socket Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset .
may be erased . ■Charger and batteries Your headset uses a rechargeable battery. You must charge the battery fully before using the headset for the first time. Simply plug in provided USB cable to USB port then to USB Car Charger Adaptor / Notebook Computer / Desktop Computer. Headset will start charging. The red indicator of headset will turn on when charging. When the battery is full, the red indicator of the headset will turn off. 1) Charge the headset until the red light on the headset turn off.
■Switch the headset on or off To switch on, press and hold the Answer/end key for 3 seconds. The blue indicator light starts to flash. To switch off, press and hold the power key for 4 seconds until headset beeps 2 times and the red indicator light is displayed briefly. ■Pair the headset with a compatible phone 1. make sure your headset is turn off 2. push the answer/end key for 8 second until the blue and red light flashes alternately 3.
■Disconnect the headset from the phone To disconnect the headset from your phone(for example, to connect the phone to another Bluetooth device), do one of the following: ·Switch off the headset. ·Disconnect the headset in the Bluetooth menu of your phone. ·Move the headset more than 10 meters(30 feet) away from the phone. You do not need to delete the pairing with the headset to disconnect it.
connected to your phone. · Ensure that the Bluetooth feature is activated on your phone. · Check that the headset is within 10 meter(30 feet ) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices. 3. Basic use ■ Call handling To make a call use your phone in the normal way when the headset is connected to your phone. To answer a call press the answer/end key, or use the phone keys.
Voice dialing (dialing a number by saying a name) It is possible to make a call directly from the headset using voice recognition. To use this voice dialing function, your mobile phone must provide this option and corresponding voice samples must have been recorded. Step-1 Press the Answer/end button of the headset one time, you will hear a beep prompt. Step-2 When you hear a short tone, say the name of the person you wish to call loudly.
During a conversation, press and hold the Answer/end button for 3 Seconds, the BH13 will be switched off and the call will be transferred to your mobile phone. If you want to transfer the call back to your BH13 press and hold the Answer/end for 3 seconds till you hear a beep. Release the button and the call is transferred back to your BH13. 4. Battery information Your device is powered by a rechargeable battery.
summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15℃ and 25℃ (59℉ and 77℉). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible.
parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
